shauns2211

Santa Cruz Bronson C Spec - Medium Frame C - Rockshox Pike RCT3 Forks 160mm Travel - Shimano XT M8000 groupset - Hope cranks with oval chain ring - Hope Bottom Bracket - WTB 123 Rims - Hope Pro Evo 2 Hubs, 40t rear - Hope Tech 3 E4 brakes with hope floating 180mm rotors - RaceFace 50mm Atlas stem - Santa Cruz carbon bars - Rockshox Reverb dropper post - Fox Float X Factory Series Kashima coated 150mm shock - Shimano XT derailluer 11t to 42t - Hope headset - Schwable Nobby Nic tyres (new) Upgraded specification £5k when new and has since been well cared for and maintained regardless of cost. Cleaned after every ride. There are a few small paint chips, tiny scratches and small rub marks as is to be expected, however these are just cosmetic. Recently the dropper post has developed a small amount of sag, other than that it works perfectly fine. Other than this, the bike is in fantastic condition, no damage, cracks, dents or bent bits and everything works as it should. I have a new set of pivot bearing to include. Any questions please don't hesitate to ask. Thank you for looking

Brand new Industry Nine Hydra hubs Front & Rear Boost spacing 32 hole spoke hole 6 Bolt disc mounts HG Freehub body (Shimano) Black Any questions please don’t hesitate to ask.

Santa Cruz 5010 CC mountain bike for sale. Spec: Frame - Santa Cruz 5010 CC M Shock - Fox DPX2 Headset - Hope. Forks - Rockshox Pike 140mm Dropper Post - 175mm Ls lev Bars - Burgtec RW carbon 800mm Stem - Burgtec 50mm Wheels - 30mm Santa Cruz reserve carbon rims built to a hope pro 4 hubs Tyres - 2.6mm Michelin wild enduro Brakes - Shimano SLX M7120, with 203mm Icetech rotor front and 180mm rear Groupset - Shimano deore 11 speed. Overall condition is very good but does have a few scuffs as you’d expect. The dropper seat post could do with a service or replacing due to wear. Small mark on the rear rim. Very light bike with it being the CC frame. Any questions don’t hesitate to ask. Close up photos will be added soon. Thanks.

Santa Cruz Bronson CC V2 Frame. This is a large. Comes with Hope semi integrated headset. Boost frame with 148mm rear end. It’s the CC model so it’s a lot lighter. Does have a few marks and some cable rub as you can see on the photos. The fox DPX2 is also included, this hasn’t seen much use. Head angle:65.9° Seat angle:69° BB height:336mm Chainstay:434mm Front centre:760mm Wheelbase:1,194mm Down tube:704mm Top tube:615mm Reach:445mm There will be some other parts for sale to, so if you need anything just give me a message and I can combine postage. Any questions please don’t hesitate to ask.