snow-ape

Atomlab pimp 2 Dirt jumper. Mechanic owned. I wanted a simplified bike to ride while I traveled the country. Now I miss having rear suspension and gears. *i am in Titusville, FL until 05/26 with the bike. It just sits now that I have a new one. Can ship if needed.* Currently setup as single speed. I took this bike down to bare frame last summer. Rebuilt the Marzocchi dj1 coil/air fork, repacked all the wheel, bottom bracket, headset, and freehub bearings. Trued wheels and checked spoke tension. Bled the brakes and replaced the pads, new grips and new chain. New pedals with 0 rides on them. Atomlab pimp lite wheelset Avid elixir front and rear brakes Maxxis Holly roller tires Small tear in right side of seat This bike has 0 issues and requires no maintenance to be ready to ride. It manuals well and is super fun on pump tracks, dirt jumps and bike parks. After my last knee surgery I realize I need rear suspension.

Stem came on a DJ bike I just bought. 31.8mm clamp diameter, 65mm length. I went with a 35mm stem instead. It looks super clean and like new.

I bought this shock for my bike here on pinkbike. The owner said it was good to go and showed me rebuild paperwork from 3 months before I bought it. I swapped it in and the Ctd remote worked and the adjustments worked great. After 3 rides it was weeping a small ring of oil. I brought it in to get the air can serviced thinking that the shop that did the work may have nicked the seal. I found out it will need a new damper rod($12 out of stock at the time). Not wanting to wait I bought a Fox DH X2 from a bike tech instead. **This shock will need a rebuild AND a damper rod.**

Float X off my 2017 Diamondback mission pro. Previous owner said it was fully rebuilt by a local shop. I rode once, CTD was fully functional and perfect until the second day when I rode it to a ups store then it lost CTD functionality because the top cap was loose and it lost the nitrogen charge. I contacted the shop that performed the work but they refused to warranty their work since I wasn’t the one that had them perform the maintenance. It held air in the main chamber with no leaks but instead of doing a rebuild I bought a Fox DH X2 for my bike. Stanchion and everything is very clean but IT WILL NEED A FULL REBUILD. Again

Rockshox lyrik 170mm travel, tapered steer, 15x100 hub(non-boost). It came on a bike that I bought in spring. It worked fine but I had a custom valved Fox 36 waiting to be used. All adjustments work and it doesn’t leak air or oil. It’s starting to Polish the left stanchion. I would throw the new bushings in for $21 and do seals ($20) and oil at the same time to have a freshly rebuilt fork. Will come with the axle. Steerer is pretty long still. On a large frame with non integrated headset It was running 1 & 1/4 of spacers under the stem. I'm living in Portland Oregon till August 15th. Can ship for an extra $15 within North America

E thirteen chainguide. Iscg '05 old tabs. Came off my '07 iron horse Yakuza, then my '06 yeti 303, 2012 double, then my '07 Brodie, didn't fit my 2017 triple. Shows some wear on the plastic near the cog. Comes with mounting screws and extra, new, uninstalled cog.