Block user

Recent

Added 14 photos to Buysell
Sep 2, 2023 at 12:34
Sep 2, 2023
Selling
Sep 2, 2023 at 12:26
Sep 2, 2023

Ibis Ripmo, Works Components -1.5° headset

$2600 USD
Hi, I have an Ibis Ripmo carbon V1, size large for sale. Overall the bike is in good shape and basically everything aside from the frame, suspension and wheels is brand new with only a pedal up and down my street to dial in the shifting. The frame has plenty of scratches and wear marks but nothing more than cosmetics. The frame is still under warranty, and I am the original owner. All linkage bearings and bushings have been replaced and have only a single shakedown ride on them. Last year I installed a Works Components -1.5° headset which puts the head angle around 64.5° from the stock 65.9°. Here are the components: Fox 36 Performance fork (160mm travel) with SKF low friction seals Fox DPX2 rear shock (55mm stroke, 145mm rear wheel travel) Ibis wheels 29" x 35mm inner width Maxxis DHF 2.5" & DHRII 2.4" tires - NEW SRAM Eagle 12 speed drivetrain: GX cranks, GX shifter, GX derailleur, NX cassette, Shimano SP-41 cable housing (the best!), DUB BB - all NEW SRAM DB8 brakes (mineral oil Codes) with 200mm rotors - NEW Truvativ Descendent 800mm handlebars and grips - NEW Bikeyoke Revive 185mm dropper post, freshly serviced I can also swap in a 160mm Bikeyoke dropper instead of the 185mm, if needed. I also have an Ibis "Porkchop" framebag for this frame which will be included. This gives you super easy access storage for carrying a tube, tools, food, etc right under the top tube. I have another bike with internal frame storage and I easily prefer the Porkchop frame bag as it's so much easier to access. If you cross shop this with a Ripmo AF bike, keep in mind the carbon frames are several pounds lighter! Prefer a local buyer but am willing to ship at buyer's expense. Thanks for looking!

Selling
Jan 12, 2023 at 8:37
Jan 12, 2023

Industry Nine Torch QR hub end caps (9x100, 9x135)

$30 USD
NEW, never used Industry Nine Torch QR hub end caps (1) set front hub end caps for QR 9x100mm (1) set rear hub end caps for QR 9x135mm These are for the TORCH hubs. Will not fit Hydra or 1/1 hubs. $20 each or $30 for the set (front & rear). More info from I9: FRONT: http://i9.bike/p/TKMA01 TKMA01 "TORCH - MTN - FR - QR Endcap Kit (100, 135 (2 x TAX620)" Torch 6 bolt mountain front QR endcaps. Not compatible with center lock hubshells. REAR: http://i9.bike/p/TKMA11 TKMA11 "TORCH - MTN - RR - QR Endcap Kit (135, 141, 170, 190) (TAX631 + TAX632)" Torch 6 bolt mountain rear QR endcaps. Not compatible with center lock hubshells.

voyageurNW voyageurNW's photo
Aug 9, 2022 at 20:14
Aug 9, 2022
Lots of clay, very slick when wet!

voyageurNW voyageurNW's photo
Oct 25, 2021 at 9:35
Oct 25, 2021
The approach to the exposed sidehill section, viewed from the south. The sharp turn around the corner (far right of pic) is the crux. Not especially difficult but don't clip your bars there.

Added 8 photos to Buysell
Jun 25, 2021 at 13:06
Jun 25, 2021
Selling
Jun 25, 2021 at 13:03
Jun 25, 2021

Raceface Turbine CINCH 32T 175mm cranks

$160 USD
Raceface Turbine CINCH crankset, 175mm, comes with 32T RF chainring all in good condition. The axle is for a standard 68/73mm threaded BB. This setup was on a Boost spaced bike and worked perfectly. I'll do flat rate $10 shipping to anywhere in mainland US. Also have a Wheels Mfg 30mm spindle, BSA bottom bracket that was used with these cranks I would sell for an additional $30. One bearing is brand new, the other is original.

Selling
Jun 8, 2021 at 9:17
Jun 8, 2021

Ibis Ripley LS size Large

$3200 USD
Lovely, super efficient bike that rips uphill and downhill. I would guess it's around 28-29lbs with pedals. Very playful bike that loves to pop and rolls fast. I rode it as my primary bike for two seasons and held onto it as a backup the last two years with the hope that it might help my wife get into riding (no luck). Time to let it go and free up some garage space. Frame is in good shape but has a few small clearcoat chips/scratches as would be expected in a used bike. Fork and shock were rebuilt two years ago, around the time I stopped riding it on a regular basis, so both should be in good shape. Drivetrain was completely replaced around 300 miles ago so is in excellent condition. Grips are new. Parts spec: Rockshox Pike RCT3 fork (140mm) - note, I have a 130mm air shaft as well that will be included. Fox Float Factory rear shock (120mm) full SRAM Eagle GX 12sp drivetrain - less than 300 miles on cassette, chain, and chainring (32T) Formula Cura 2 brakes (180mm rotors F&R) Fox Transfer 150mm dropper post with Paul Components lever Industry Nine (I9) Torch Enduro wheelset, set up tubeless Maxxis Forekaster 2.35 front (75% tread), Maxxis DHRII 2.4WT rear tire (50% tread) Easton Haven 35mm x 750mm carbon bars Ibis/Cane Creek lock on grips WTB Volt saddle For more pics or details, feel free to reach out. I'll split shipping with buyer.

voyageurNW counterpoint's article
Nov 8, 2020 at 21:42
Nov 8, 2020
ridelog deleted...
Aug 6, 2019 at 21:10
Aug 6, 2019
Load more...
You must login to Pinkbike.
Don't have an account? Sign up

Join Pinkbike  Login


Copyright © 2000 - 2024. Pinkbike.com. All rights reserved.
dv65 0.023573
Mobile Version of Website