wazaB

Complete bike or may split for right offer.... 150mm Rear Travel - Cane creek DB Coil IL with 550lb spring was over £400 from TF tuned Reynolds 853 Steel Gen 2 (2017) DVO Diamond D1 Forks with 150-170mm BOOST Cane Creek H/Set 27.5 Wheels - Hope Fortus 26 Maxxis Aggressor Tyres (tubeless setup) Hope V4 Stealth Brakes & Floating 205mm Rotors (braided hoses) Syntace X-12 Boost 148x12 Rear Axle Fitted Saint Cranks & Blackspire Chainring Saint BB DMR V12 Pedals SRAM GX Shifter & Rear Mech (12s) SRAM Eagle Chain SRAM 11-50 Cassette Bergtec Stem & Bars (RW Enduro) ODI Loack-On Grips OneUp Dropper 31.6 - 120mm Travel SDG Bel-Air Saddle Nukeproof Seat Clamp New frame bearings fitted Jan 2022 (purchased from Cotic) I purchased the frame Feb 2021 which was in its original orange colour and decals. Early this year I stripped the bike fully and had the frame powder coated and new gen decals put on. There is no ware movement in the rear suspension. There is a very small ding in the top tube which is indicated on a couple of the photos. You cant notice it unless your close up and looking for it. This was there when I purchased the frame back in Feb 2021. Slight wear on the crank arms and slight scuffs on the tips. Theres a tiny scratch on the bottom of on of the fork legs near the axle, again a photo indicating this. Overall its had very little use due to having other bikes and working away most os the time. So to say its in almost pefect condition is an understatement. NOTE: I wont pack and ship this so local pickup only. Maybe meet somewhere depending on distance.

Bought this 175mm for a new build but got carried away on the length. Too big/long for my frame (and my legs). Cost me £260 Oct 2021 but fitted it only to realise my error. Its never even left the house so its unused. I recycled the box but £150 is a bargain...

Mavic Deemax Pro specs: • 27.5in hookless aluminium rims • Internal width: 28mm front / 25mm rear • Mavic QRM hubs with 7.5-degrees of engagement • UST tubeless • 24 straight-pull aluminium spokes • Actual weight: 1,700g, (810g front / 890g rear) Bought these new late 2019 and they have had hardly any use and are in perfect condition. No scratch's, dings or dents and both wheels true. I purchased a 20mm bolt-through hub and fitted that instead of the 15mm the front came with (requirement for forks I had at the time). Since then I moved to 15mm bolt-through and had to purchase a 15mm hub adapter kit from Mavic. There are loads of spares including other adapters for the rear hub to allow use on 12x142 or 12x148 (Boost). The front can be setup as standard or boost using the spares. The rear currently has a standard 11/12s cassette body fitted. An XD body is included. Brand new tubless valves installed. UST rims dont require tape so just add tyres and solution.. Postage at buyers cost. PLEASE READ THE ADD. NO OFFERS....