Category: Enduro Bikes
Frame Size: M
Wheel Size: 29"
Original Post Date: Jun-09-2015 9:03:59
Last Repost Date: Oct-26-2015 9:08:19
Still For Sale:
Sold
View Count: 2,164
Watch Count: 5
This has been a great bike, however, I'm riding my cross bike more anyway, so it's time to sell. When I did it was a beast, it climbs better than it has any right to, the short chainstays make it handle tight switchbacks with ease, and it monsters down descents with reckless abandon. Bike has low miles (600-700) and I just had my LBS give it a little tune-up.
About the bike: 2015 Specialized Enduro Expert 29er, Size Medium, Stock Build (except the Race Face Crank Protectors I added). No trades, test-ride requires your ca$h in my hand, you crash it, you bought it. I accept Paypal, Dwolla, Cash, or Cashier's Check if we meet at your bank.
FRAME: FACT IS-X 11m carbon, 29" geometry, FACT IS construction, FACT carbon front triangle, M5 alloy rear triangle, tapered headtube, PF30 BB, internal Command Post IR routing, 142mm dropouts, full cartridge bearing pivots, replaceable derailleur hanger, 155mm travel
**Same frame layup as S-Works Model!**
REAR SHOCK: Custom Cane Creek DB AIR Inline, high/low-speed compression and rebound adj., w/ climb switch, 8.5" x 2.25"
FORK: RockShox Pike RC 29, Solo Air spring, tapered alloy steerer, w/ lockout, compression, rebound adj., 15mm thru-axle, 160mm travel
HEADSET: 1-1/8 and 1-1/2" threadless, Campy style upper with 1-1/2" lower, cartridge bearings
STEM: Specialized XC, 3D forged alloy, 4-bolt, 6-degree rise
HANDLEBARS: Specialized XC, mini rise, 7050 alloy, 8-backsweep, 6-upsweep, 10mm rise, 31.8mm
GRIPS: Specialized Sip Grip, light lock-on, half-waffle
FRONT BRAKE: SRAM Guide RS, metallic pads, Guide R caliper, 200mm Centerline rotor
REAR BRAKE: SRAM Guide RS, metallic pads, Guide R caliper, 180mm Centerline rotor
BRAKE LEVERS: SRAM Guide R, alloy lever, w/ reach adjust
REAR DERAILLEUR: SRAM X01, 11-speed, carbon cage
SHIFT LEVERS: SRAM X1, 11-speed, trigger
CASSETTE: SRAM X01, 11-speed, 10-42
CHAIN: SRAM 1190, 11-speed
CRANKSET: Custom SRAM S-2200, carbon, PF30 spindle, 30T, 94mm BCD spider
BOTTOM BRACKET: SRAM, PF30, OS press-in bearings, sealed cartridge
RIMS: Roval Traverse Fattie 29, alloy disc, 29mm inner width, 24/28h
FRONT HUB: Roval Traverse, 15mm thru-axle end caps, 24h
REAR HUB: Roval Traverse 142+, XX1 driver body, 12mm thru-axle, 28h
SPOKES: DT Swiss Revolution
SADDLE: Body Geometry Henge Comp, hollow Cr-Mo rails, 143mm
SEATPOST: Command Post IR, 3-position height adjustable, alien head design, bottom mount cable routing, w/ remote adjust SRL, 30.9mm, 125mm travel
SEAT BINDER: Specialized 7050 alloy, single bolt, 34.9mm