2015 NEW e13 e*thirteen TRS Race 650b wheels Carbon Hub

$900 Australian Dollars plus shipping 1610g

E Thirteen TRS Race MTB Wheelset

Brand New, never used. 20mm Front hub, 142x12 rear hub. XD driver.

$1600 AUD on Chain Reaction Cycles

TRS (Trail Security) components are designed to fill the expanding Enduro and All Mountain categories. Engineered to take extreme punishment dealt by riders on enduro bikes, yet they are still light enough to use on XC specific bikes.

EXAlite Aluminium
A basic shake and bake blend of 8 special herbs and spices (Silicon, Iron, Copper, Manganese, Magnesium, Chromium, Zinc, and Aluminium.) It comes in three different performance blends: EXAr, EXA+ and basic EXA.

660 Freehub
Our indestructible freehub rachet mechanism. All of our hubs have a blazing fast 6 degrees and 60 points of engagement to get you the best acceleration on climbs and out of tight corners.

Angular Contact Bearings
Angular contact bearings are supported by a thick section of bearing race on either side, as well as top and bottom. These bearings are designed to support 'combined loads' in both the axial (turning) and radial (accelerating) directions.

Triple Start Thread
The reverse thread nut on our hubs has 3 threads for more strength, and only requires a hand tightened twist for adjustment.

Tubeless System
E*thirteen Tubeless compatible rim profiles have tubeless bead features designed in, so your tubeless tyres set up easily and stay in place without those embarrassing 'burps' during high speed corners.

Lightweight Extrusion
Our new LEX and LEXe processes yield rims thaty are strong enough to cross any terrain you can throw at it.

Features:
Hub:
Swappable endcaps
Fully sealed bearings
EXAr flanges and carbon centre section
Fully rebuildable
Weight: 175g (front), 335g (rear)
Rim:
EXAr Aluminium with LEX extrusion technology.
New EXAr aluminium rim profile increases wheel performance with greater stiffness and better durability
Tubeless ready
Width: (ID/OD): 23.4/28mm
23.4mm rim bed to better accommodate wider tyres
30% stiffer than previous rims
Better dent resistance
25% more material in the sidewalls
Compatible with tyres up to 2.5"
Weight: 395g (26"), 420g (650b), 445g (29")
Wheel:
Spokes: Hive quad-butted custom x 28
Nipples: Black aluminium
Axle Configuration: 15mm or 20mm thru
Intended Use: Enduro racing/training
Includes XD freehub body, alongside the standard freehub body fitted to the wheel
Weight: 695g (front 26"), 855g (rear 26"), 725g (front 650b), 885g (rear 650b), 760g (front 29"), 920g (rear 29")