2015 Kona Process 111, Large

For sale is a 2015 Kona Process 111 large. This bike is about 1 year old but has been well taken care of. I just completely overhauled the bike and made sure it is running in tip top shape. I gave the bike a complete tune up, cleaned and greased all the pivots, I had the rear shock overhauled so it feels brand new again, brand new chain and cassette, new cable and housing, new front tire, new grips, and new saddle. I also recently replaced the brake pads and front rotor and the bike only has a few rides on it since then. I also recently did a seal and oil change on the front fork so it should be good to go for a while. I have done a lot of personal upgrades to this bike over the year such as lighter handbuilt wheels, carbon bars, Shimano XT brakes and a cane creek inline rear shock. This bike comes stock with a 120mm fork but I decided to boost the fork up to 140mm to make it a little more aggressive on the descents. I personally believe it makes the bike ride better in every way. If you would rather have it set back at 120mm I can always do that. There are a few scuffs and scraps here and there from normal use but it is all cosmetic and in no way compromises the bike. The most noticeable scuffs are on the seatstays from where my foot rubbed up against in sometimes. Everything is in the pictures. Below is a list of components.

Frame: 2015 Kona Process 111 Large
Wheels: Handbuilt WTB KOM laced to DT Swiss 350 Hubs
Brakes: Shimano XT M-785B
Rotors: 203mm Shimano Icetec w/fins front, 180mm Shimano Icetec rear
Bars: 785mm Raceface SixC carbon
Stem: 50mm Raceface Atlas
Fork: Rockshox Pike
Rear Shock: Cane Creek DB Inline
Tires: Schwalbe Hans Dampf 2.35
Drivetrain: Sram X1 1x11 speed
Dropper Post: KS Lev Integra 150mm w/southpaw lever
Saddle: Bontrager Kovee