2013 Specialized Carbon Demo 8 - Large

Here is my beloved 2013 demo 8 carbon, i have had my bike 3 years now from new it has been a great bike to say the absolute least. I have improved the bike rather a lot spending quite a lot of money on it such as brakes and drivetrain, I'm not a racer and I have done freeride mainly. The bike has the general scratches here and there like any normal dh bike considering its age such as uplift marks on the forks, it has paint wear on the rear triangle however it is covered now, I can asure that there are no dents on the frame of the bike . This bike would be a fantastic bike for a starter, the carbon frame is lightweight and great for chucking around.
The bike was regularly serviced however I have not had the time to ride recently (6 months) so it has been sat in my garage and so the brakes could do with being blead again. The forks where serviced less than a year ago. it currently has a 350lbs spring on the shock however I have a 450lbs steel spring I can include.
I am 6ft 4 ish and the bike fits well however it is pushing on the small side at that height (so bear that in mind).

The Specs:

Rear Shock - FOX DHX RC4
Fork - RockShox Boxxer RC
Headset - Hope 1-1/2" integrated for 1-1/8" steerer
Cassette - Shimano Zee, 10-speed, 11-25
Crankarms - SRAM Descendant PF30
Chainguide - Gamut P-30 chain guide
Bottom Bracket - SRAM PF30 DH, 83mm shell
Pedals - Deity
Chain - SRAM KMC X10
Rear Derailleur - shimano ZEE 10-speed, short cage
Shifter - Shimano ZEE, 10-speed * NEEDS REPLACED
Handlebar - Speialized Demo low-rise bar, 750mm (shows chromag bars but they are not included)
Stem - Chromag
Grips - Renthal
Brakes - Hope V4s braided hose *NEEDS BLEAD
Hubs - Specialized Hi Lo,
Spokes - DT Swiss
Rim - Roval DH 26, alloy disc, 30mm wide (true but small ding on rear)
Tires - Specialized Butcher DH, 60 TPI, wire bead, soft dual-compound, 26x2.3"
Seat - SDG

I am including the brakes however I would like to keep my chromag bars as they were a gift.
As stated the bike currently needs the brakes blead and needs a new shifter as the old one was worn on the spring and ratchet so it is ziptied at the moment.
The price of the bike I feel is very reasonable however I will be will consider offers.
Any questions don't hesitate to ask (text me or drop a message).