Im planning to get a dorado. How will I know if its a 26 or 27.5 model?
Can run either bud. The lack of an arch on the lowers means there is room for both sizes.
Yeah I was running 650b on my 26" Dorados no problem. They have a pretty tall axle to crown height for a 26" fork - you may need to raise the crowns up a bit though.
Then test with most of the air out of the fork to make sure it clears at bottom out. I had plenty of room.
Have since changed my Dorados out for a set of 650b Emeralds though ^_^ Shame I haven't been able to ride recently though....soon!
Just upgraded my Shiver To Intrinsic Air. It used to have a coil backed IFP and a silly SPV compression valve, now it has an air backed IFP and shimmed compression damper with low speed adj. My "ShivAir" is working even better than ever. I reckon this is almost as good as it gets... Until I manage to adapt my Elka cartridge to fit... Also got a new frame a while ago. Katipo DH
`That conversion looks good man. I went for Avalanches in my '05 to keep the buttery coil feel though. I figured there's no point trying to lose much weight since its always gonna be a Shiver chassis anyway.
The Avys put the damping control on a par with '15 40-Floats and even the '15 Boxxer Charger i have but still held back by the flexiness/weight of the shiver chassis.