I have a 2014 P3 frame and some older Marzocchi 4x that I want to put on it until I can afford new forks. The P3 has a tapered head tube and forks are 1 1/8. Can anyone tell me the right set up I need to put this together.
You need a headset with a 1/2 lower bearing and race that'll fit an 1/8 steerer tube. This is the one I took off of my 2015 P3 which uses a 1/8 straight steerer fork with the tapered head tube. I'll let you have it really cheap if you need it. I have no use for it now. You'll be good to go as long as the upper bearing race is still pressed into the frame.
https://ep1.pinkbike.org/p2pb12069485/p2pb12069485.jpg TOP https://ep2.pinkbike.org/p2pb12069392/p2pb12069392.jpg BOTTOM
I would be stoked to get a deal on the headset. Just want to get this thing going then upgrade when I can. So is the image you sent for both top and bottom and will I need anything else to install forks and hit the park? I appreciate your help!