Specialized Big Hit riders thread to elect the coolest Big Hit...

PB Forum :: Bikes, Parts, and Gear
Specialized Big Hit riders thread to elect the coolest Big Hit...
Author Message
flag jwollerton
Posted: Dec 21, 2014 at 7:05 Quote
nickkk wrote:
jwollerton wrote:
I know this thread is to post BigHits but I thought it would be the best place to come!
Im currently looking at this https://www.pinkbike.com/buysell/1654842/?directtofirstphoto as my first FR/Dh bike and was wondering what any of you thought of the specs,
thanks

Given the spec, and age of the components I'd haggle DOWN from £500. I've seen newer BH's on here with better spec for the £££. Its not an unreasonable amount to ask for this bike but it's an oldie. I would personally have a close look at the frame in person to be sure its not had too hard a life. As a first FR/DH bike then its a winner but pay close attention to those bearings and welds Smile

Okay thanks Smile
flag nickkk
Posted: Dec 21, 2014 at 11:07 Quote
jwollerton wrote:
nickkk wrote:
jwollerton wrote:
I know this thread is to post BigHits but I thought it would be the best place to come!
Im currently looking at this https://www.pinkbike.com/buysell/1654842/?directtofirstphoto as my first FR/Dh bike and was wondering what any of you thought of the specs,
thanks

Given the spec, and age of the components I'd haggle DOWN from £500. I've seen newer BH's on here with better spec for the £££. Its not an unreasonable amount to ask for this bike but it's an oldie. I would personally have a close look at the frame in person to be sure its not had too hard a life. As a first FR/DH bike then its a winner but pay close attention to those bearings and welds Smile

Okay thanks Smile

No worries, I hope she is a runner and you get out there in those hills Smile
flag mwilliams
Posted: Jan 23, 2015 at 6:11 Quote
What headsets is everyone using in their 2010 bighits with boxxer forks?

Got an fsa in at the minute but need to replace the lower bearings and want a sealed unit.

Can't seem to find any on the net that are external cup for 1.5" headtube and 1-1/8 steerer.
flag jprock
Posted: Jan 23, 2015 at 11:43 Quote
mwilliams wrote:
What headsets is everyone using in their 2010 bighits with boxxer forks?

Got an fsa in at the minute but need to replace the lower bearings and want a sealed unit.

Can't seem to find any on the net that are external cup for 1.5" headtube and 1-1/8 steerer.

FSA Orbit

I have this headset on my 2005 Devinci Ollie, 1 1/8 steerer, 1.5 headtube. i didnt had any problem with that headset in 5 years of abusive riding.

http://www.fullspeedahead.com/products/cyclocross/orbit-z-1-5r-ie-headset/

I can't remember though if a zerostack type headset would fit in a 2010 bighit. it might only accept external cups :/

If not, there is still the pig fat pig option, but its quite heavy and the bearings arent sealed. Hope you'll find something.
flag mwilliams
Posted: Jan 23, 2015 at 13:16 Quote
That's what's in the fsa pig. I could get new bearings, would ideally like a sealed cartridge bearing headset.
flag jprock
Posted: Jan 23, 2015 at 16:58 Quote
The Orbit have sealed cartridge bearings
flag RBT84
Posted: Feb 8, 2015 at 3:44 Quote
photo
Has anybody fitted a Rock Shox Kage RC to a 2006 big hit?, I'm thinking of replacing the Fox Vanilla R on mine.
flag Bruccio
Posted: Feb 11, 2015 at 0:09 Quote
here i go with my old 2008 frame...
photo

photo

[P=https://scontent-b.xx.fbcdn.net/hphotos-xpf1/t31.0-8/p720x720/981947_10201230248932735_1005785715_o.jpg][/P]

photo

too bad i just sold it....for an M9 Big Grin
flag Wlisle0803
Posted: Feb 13, 2015 at 11:16 Quote
So, it is possible to run a 1x10 on a 2010 specialized big hit fsr 1 ???? I have had conflicting answers on this subject ...
flag Huckleberrymarsh
Posted: Feb 13, 2015 at 23:42 Quote
Wlisle0803 you can do a 1x10. Cassette spacing on hubs r the same as a 9speed
flag Wlisle0803
Posted: Feb 16, 2015 at 12:31 Quote
unfortunately i have an 8 speed and just was informed its not possible..... Frown
flag Huckleberrymarsh
Posted: Feb 21, 2015 at 6:32 Quote
Technically u can install a 10speed cassette on a 8speed hub by adding a spacer . But it's not recommended cause 10speed cassettes r much narrower compared to a 8speed cassette n will cause dents on your hub body. Try n search online for second hand rear hubs, that would be a better option
flag bubabike
Posted: Mar 16, 2015 at 14:24 Quote
Hello im Marcelo, "buba" for frends, im from Uruguay and this it my Specialized Big Hit II

Enjoying the beautiful view with she . . . in the top of Sierra de las Animas .
Top of Sierra de las Animas waiting for the punishment . . .

Specialized Big Hit II 2012 frame, Boxxer RC,Darmoor Nitro bar, Easton Havoc stem, Specialized Pseries Grips, Specialized Henge saddle, Full Shimano Saint, Truvativ Guidebox Chainguide, Shimano Yumeya chain, Shimano XTR Cassette, Shimano 636 pedals, Mavic EX 325 Rims 36h, Specialized Bucter 2,5" Tires. And moto tubes 21" 2,75-3" inch, 2 mm thickness!!!
flag Stevehume
Posted: Mar 19, 2015 at 16:23 Quote
This is my Big hithttps://ep1.pinkbike.org/p2pb11994945/p2pb11994945.jpg
flag Huckleberrymarsh
Posted: Mar 20, 2015 at 11:33 Quote
Merula wrote:
TomShark wrote:
Added DaBomb Cannon R dropper seat post. Mint. 2013 Totem RC2DH Works Components -1 deg headset Nukeproof Neutron Al-Ti pedals 760 wide bars grips and saddle. Sram X9 10 speed MRP G2 chain guide over Funn Hooka DH cranks. Satint M-810 brakes Fox Van shock. Keen for a CCDB air or Vivid air if anyone has one for a good price...
2011 Big Hit looking ready for some burly enduro. 10sp, dropper post, Totem RC2DH forks, would be keen on a CCDB air or Vivid air so shes a little easier to get up the hills!


How much does it weigh? Mine´s over 18kg with the original build.. No way i could pedal it uphill..

My current build with tubeless n ztr flow ex. Weighing in at 16.4kg only

 


Copyright © 2000 - 2024. Pinkbike.com. All rights reserved.
dv65 0.021166
Mobile Version of Website