does anyone know which one i need on my 2006/2007 trek session 77? i do not know the difference between the two? any help would be appretiated, cheers.
"Specialized, Giant, and Trek use ISCG-OLD on any model with ISCG tabs (with the exception of the 2007ish Trek Session 10, which used ISCG-05 and a special XW backplate for their elevated frame mounted roller).
Companies that use ISCG-05 in 2009: Santa Cruz (Nomad/Bullit/V10/DriverIron Horse did since 05. Evil Norco Kona Lapierre Yeti Transition TR450 and newest model Covert Intense - All 2009 and newer models. ISCG-05 bolt pattern but tabs misaligned from the drawings on 951.
The general rule, if you don't know what ISCG pattern you have, is to simply measure the distance between the bolt holes. You can also use the drawings below to determine if your ISCG mounts are made to specification as well."
Do both plates have the same diameter of the hole??
pipes10 wrote:
Courtesy of philw86:
"Specialized, Giant, and Trek use ISCG-OLD on any model with ISCG tabs (with the exception of the 2007ish Trek Session 10, which used ISCG-05 and a special XW backplate for their elevated frame mounted roller).
Companies that use ISCG-05 in 2009: Santa Cruz (Nomad/Bullit/V10/DriverIron Horse did since 05. Evil Norco Kona Lapierre Yeti Transition TR450 and newest model Covert Intense - All 2009 and newer models. ISCG-05 bolt pattern but tabs misaligned from the drawings on 951.
The general rule, if you don't know what ISCG pattern you have, is to simply measure the distance between the bolt holes. You can also use the drawings below to determine if your ISCG mounts are made to specification as well."
anyone know what a message 2012 tr450 is?...just found that my 08 glory device won't fit
Try reading the second post.
oh well done..thanks for that..i only got to the bottom of the post and didn't read the first bit
...i had read that post but someone mentioned to me that transition have changed their fitment from 2010 (when the post was written) from the 2012 version that have.
so i refer to my previous question!...can anyone please confirm the fitment i need?
From 2010 on it's ISCG 05. They wouldn't go from ISCG old to ISCG 05 then back to old. You can also measure the bolt hole pattern if you have the bike handy. You can also look on the Transition site. It's ISCG 05. Link from site.
From 2010 on it's ISCG 05. They wouldn't go from ISCG old to ISCG 05 then back to old. You can also measure the bolt hole pattern if you have the bike handy. You can also look on the Transition site. It's ISCG 05. Link from site.