adythegoose1000

For sale a matching Raceface Chester AM bar and stem combo in the newer 35mm clamp size. Bars are 780 wide (uncut) with a 20mm rise. Stem is 35mm length. Torqued to correct settings ready for use. Selling as I’ve just bought a Renthal Carbon 35 bar and Apex stem. Bars and stem in super condition, well looked after, no crashes, just the usual marks from brakes etc and odd small mark, please see photos (more can be emailed). Any questions please ask. £35 collected, £40 posted. Adrian

My 2013 Nukeproof Mega TR, size M (17), I'm 6" and it fits me. I bought the frame and have built it up using pre owned and new parts to build a custom spec mega that has handled everything I've thrown at it, all black runs at Glentress, Llandegla, Coed Y Brenin, Gisburn, Peak runs including Jacobs ladder, Hope Valley runs including the Beast and Potato Alley. Climbs well and goes the other way even better. Spec - > Medium Frame 17" > Marzocchi CR55 170mm forks, currently set at 150mm with Gold race coated stanchions, super compliant, especially at the start of the stroke. 20mm axle, 35mm lowers. Really nice, super strong forks, great reviews. > Fox DHX RC4 rear coil shock with Kashima coating, 650lbs spring, also included are a 500lbs Fox and a Cane Creek 550lbs springs. Shock has rebound, HS and LS compression and bottom out control adjustments. > Renthal bars, 780, 20mm > Renthal Duo stem, 50mm, 10mm rise > ODI Troy Lee Grips > Hope Tech 3 levers, X2 calipers, braided hoses, race Ti sintered brake pads, recent bleed > Hope 180mm Floating rotors > Uberbike brake mounts > Charge Spoon saddle > KS Lev 125 dropper post > Stans ZTR Flow EX 26" wheels on Hope Pro2 evo hubs, not tubeless at the minute > Currently on Maxxis High Rollers but will probably have Minion F and High Roller R > SLX crank > Zee shifter > New Shimano XT M786 Shadow+ 10 Speed Rear Mech > Sunrace 11 - 40 rear cassette > Saint pedal > Uberbike ceramic gold jockey wheels, original XT ones also included > Blackspire Snaggletooth Narrow Wide Chainring 30T > Uberbike black chain ring bolts > Hope BB, black in colour > Uberbike Ceramic headset, bottom cup is BX but has the Uberbike ceramic bearings (I bought the wrong size Uberbike but just kept it) > RapidRacer EnduroGuard Mudguard in yellow and black > Yellow Uberbike Dee Dars The bike has been well used and shows age and use related marks, including around the chain stays and 2 small (not deep) hits from rock strikes near the BB. There are a few spots where the yellow paint has chipped. Also the previous owner had it helitaped which I took off as it was old but it left some of residue which I had tried to remove. I like to ride hard and push my bike but I always clean after every ride and the bike is stored in my 2nd bedroom, never outside. I regularly clean and grease the BB, headset, derailleur, crank/chain ring, chain and wheel bearings to make sure all is working as it should. I use Wickens and Soderstrom No.4 for the forks and shock to keep them running nice. I think that's all, I may have missed something. It's a great bike, very capable, I'm only selling as I would like to move to a Large frame 650b.