dieter

Shimano XTR M965 hubs laced to Light Bicycle carbon rims. Wheels are used but well maintained. Handbuilt by an experienced wheel builder and ready to rumble. True, round, and dished. No dents, flat spots, or cracks. These were the wheels on my commuter for several years until COVID put an end to my days in the office. Since 2020 they’ve been ridden sparingly. It’s been 7 or 8 years since I bought the rims so I don’t remember the specs. They’re about 35-40mm deep and 18-20mm wide internal. I think they’re hookless but they might be hooked. I’ve been riding them with 28mm tires at 90psi so regardless of the bead type they’re suitable for modern road ties and pressures. Rear wheel is 28 hole with black DT Aerolite aero spokes and black alloy nipples laced two cross on both sides. The hub natively fits 8-11 speed mountain bike cassettes and 8-10 speed road bike cassettes. The rear wheel includes an Ultegra 8000 series 11-28 11 speed cassette that’s been modified by LascoConcept.com to fit on a 10 speed freehub body. The cassette has very low miles on it (less than 200 miles). Front wheel is 24 hole (yes, the m965 XTR hub were available in 24 hole version) with black DT Aerolite aero spokes with black alloy nipples laced two cross on both sides. The front is a 9x100mm quick release and the rear is 10x135mm quick release. Both XTR M965 quick releases are included. Both hubs accept Centerlock rotors, neither hub includes a Centerlock lock ring. Both have Stan’s yellow rim tape. The rear is currently set up tubeless, the front currently has a tube in it. Set up tubeless with Stans rubber rim strips. Includes Schwalbe Pro 1 700x28mm tubeless microskin tires. These have been replaced some time in the past few years, they’re both in good shape but they have different hot patches so one must have more miles than the other. Will ship but buyer pays all packing and shipping costs.

Giant Liv Avail full carbon disc brake frameset. Comes with frame, fork, headset, handlebar and stem. Built it up for my wife and she only rode it a few times. She is 5’4” and the seat mast is cut to size but has some adjustment for slightly taller or shorter folks. At the current seat mast length, the minimum seat height is 595mm and the maximum seat height is 610m (from the center of the BB to the center of the seat rails). Buyer pays shipping.

Marin Nicasio frameset 50 cm. Comes with frame, fork, headset, stem, handlebar and seatpost. Shimano bb is negotiable. Color is navy blue with orange decals. Bike has disc brake mounts and has mounts for racks and fenders. Minimally ridden for commuting. Bike is in excellent condition with one minor paint scratch on tt from stepping over. This is a 50cm size, seat post measures 18.5” and tt measures 19.5”. I’m 5’4” and the stand over was very good for me. The last photo shows the chainstay clearance with a 700x35 tire. Happy to answer any questions or provide any measurements.

I bought this as a project and never got around to it. I believe it is a 2014 model year frame but I’m not sure. Includes X-Small frame, FSA headset, Race Face seatpost, Tektro Auriga brakes, SRAM 11 grip shifter, SRAM GX derailleur, Sunrace 11-42 11speed cassette, unknown brand of square taper bottom bracket, and TLD lock on grips. The frame and all the parts are used and show obvious signs of use but they all appear to be in functioning condition. Info on the frame geometry is here: https://bikerumor.com/2012/01/26/first-look-niner-unveils-extra-small-emd9-29er-hardtail/ Info on the frame specs is here: http://bikesheet.com/bikes/2014NinerEMD91StandardXSSMLXL.html Buyer pays all shipping costs. Email if you want more/specific photos.

Rolling chassis that has been barely ridden and is in great shape overall. We bought this as a frame, built it up, barely rode it, and then slowly stole the drivetrain for other projects. It’s a great mountain bike for a part time rider, child, short adult, or beginner (or any combination of those things). Included in the sale is: Frame (currently set up with 135mm qr dropouts but 142x12 +axle, and 135mm track ends for a single speed are included), Fork (Fox 32, 27.5”, 15x100mm through axle-not boost, 140mm travel), Headset (Hope bottom cup, Cane Creek 40 top cup), Stem (no name Amazon specials), Bar (Answer Pro Taper flat), Grips (DMR Deathgrips), Complete wheels (Hope front hub and Stan’s rear hub, Ibis 638 rims, DT Revolution spoke, Alloy nipples), Tires, tubes (26x2.8 Maxxis Minion DHF and 26x2.8 Maxxis Minion DHRII) quick release seat collar (Salsa 30.0mm), and 10spd cassette (Shimano HG-81 11-32). To complete the build you’ll need seat, seatpost, complete front and rear brakes, cranks, bottom bracket, pedals, shifter, and derailleur. ***The brake levers, calipers, and rotors shown in the pictures are not included in the sale*** Frame specs are here: https://surlybikes.com/bikes/legacy/instigator_2 Buyer pays all shipping costs. Email if you want more/specific photos.

BB Mount MRP single ring guide. Fits up to 32tooth chainrings. This hasn't been mounted on a bike in years, it's in pretty good shape. Buyer pays shipping.

Shimano SLX rear hub laced to Ibis Cycles 638 26”+ rim. Wheel is very lightly used. Handbuilt by an experienced wheel builder and ready to rumble. True, round, and dished. Taped for tubeless with tubeless valve stem installed. No dents, flat spots, or cracks. Rear wheel is 12x148mm. 32 hole with silver DT Competition butted spokes and brass nipples laced three cross on the drive side and the non drive side. Hub is designed for centerlock disc brake rotors. Includes an almost new 26x2.8" Maxxis Minion DHRII. Will ship but buyer pays all packing and shipping costs.

I replaced the stock instep pad with the wider, cushier pad from a pair of Dominators but the blue is slightly off. It seemed like a reasonable tradeoff. Worn occasionally as my back up commuting shoes for about two years, they’re not perfect but they have a lot life left in them. Ask for more pictures if you want them. Buyer to pay all shipping costs if you’re not local.