Grthshw

Pair of Industry Nine Hydra Hubs, specs as follows: Front: 110x15, 28 spoke Rear: 148x12, 32 spoke, shimano microspline freehub Some minor marks where the spokes we laced and around the axle edges. Rear hub needs new bearings and the front could likely do with a new set in the near future as well. I would highly recommend changing the rear hub bearings before building up a wheel.

Hope 140mm floating disc rotors. Pair Six bolt pattern, used but all still straight and true and in good order with loads of life left in them.

Fox SLS (light weight) Spring 550lb x 61mm Only used a handful of times before I went down a spring rate.

Fox DHX2 210x55 / 210x50 Shock with 2 position adjust. Great shock in great condition. Selling as I’m changing frames and selling my frame with the stock air shock it came with. Currently set as 55mm stroke. Can be changed to a 50mm stroke internally (was original bought as a 50mm stroke). 500lb standard steel spring included Shock hardware included: - 25x8 front - 30x8 bearing rear (can be easily replaced for a normal bush? Can post international if you cover postage

Awesome bars with engineered flex to make them feel more like 31.8mm bars in terms of trail compliance (easier on your hands/forearms). for more details check out https://uk.oneupcomponents.com/collections/handlebars/products/carbon-bar. In excellent condition, some marks under the grips but once the grips are on you won't see them. Only feeling because I change my frame for something with a lower stack so have swapped for the 35mm rise version. Cut to 760mm.

This is the Gen 3 Santa Cruz 5010 CC (higher quality lighter carbon model) frame in size large with Ohlins TTX coil shock. I bought the frame new 2 years ago and it’s been well looked after and not been involved in any big crashes. The downtube has been helicopter taped but rest of the frame has not been invisiframed or similar so it shows some minor marks and scuffs from being ridden in British conditions. The frame is structurally sound but due to some minor cosmetic scuffs and scratches I’ve priced it at £200 less than similar listings that have been invisiframed. The frame comes with: - Ohlins TTX coil shock with Cane Creak light weight Valt 550lb spring and 5 spare bushings (next service due in April) - Burgtec Titanium shock bolts - Burgtec rear axle - Custom made removable frame bag - Spare lower link (makes servicing the bearings super easy as you can just swap links and flush the dirty with grease after the fact from the dirty link) - Spare mech hanger It’s an awesome frame, super fun to ride and super versatile. I’m only selling it because I’ve upgraded to the new V4 version of the frame. Collection in person preferred, however given the current lock down I can box and post at buyers expense.

Fox Transfer Factory 150mm drop 31.6 dropper post with brand new Raceface lever. The post came stock on my Commencal and has had a couple of months use before I swapped it out for something with more drop. Works and looks great The lever is brand new and still in its packet (not sure why Commencal sent me two remotes).