inches

Brand new, just been fitted but never been ridden (ended up selling wheels) , 11-46 for sram or shimano Great range for 1 x X setup.

Fox Float 32 Fox QR 15mm axle, 26" Currently set at 120mm but can be adjusted internally from 100mm to 150mm. Recently serviced & upgraded to enduro seals (used once since service) 190mm of tapered steerer tube (will double check) Excellent fork Would be open to swapping for 160mm fork (does not come with brake adaptor as shown in pics)

Hi, I have a Nukeproof Snap frame for sale Size regular (snaps only come in two sizes, regular or large) Bought less than a year ago and only used a handful of times. Very little cosmetic damage at all, a few scuffs here and there but no major scrapes, chips or dents etc. Comes with seat clamp , and Hope headset. Amazing 4x/jump frame, selling because I want to get into endure (will swap for enduro frame) Alan

Hi, Looking to swap my Nukeproof 2012 for an enduro Bike (preferably small frame). Bought the frame brand new and built it up with custom parts but its hardly been ridden and only been used a handful of times. Few minor rubs on the frame. Spec is: -Frame: Size Regular -Forks: Fox Float 32 FIT RL 15mm bolt-thru upgraded with enduro seals and replaced and cleaned on last ride (hasn't been used since) -Brakes: Shimano Saint m800 brakes -Headset: Hope -Handlebars: Eason Havoc DH bar, some cable rub on bar -Stem: Thomson Elite X4 60mm -Grips: Nukeproof grips with Nukeproof end caps -Crankset: Shimano SLX -Chain Device: E13 SRS -Chainring: Renthal 38T -Mech: Sram X0 rear mech Short Cage (20th anniversary) -Shifter: Sram X0 -Cassette: Sram PG 990 -Chain: Sram -Saddle: SGD Bel Air -Seatpost: SDG I Beam -SeatClamp: Giant Seat collar -Tyres: Maxxis Holy Roller 26 -Wheelset: Hope Pro 2 hubs, Front Rim Mavic EX 729 Rear Rim 721 -Pedals: Nukeproof Proton Alloy-Ti Flat Pedals -Skewer: Hope Thumb shifter part on the mech shifter is broken, its not expensive to replace or I can supply an X9 shifter.

For sale is my Nukeproof 2012 . Bought the frame brand new and built it up with custom parts but its hardly been ridden and only been used a handful of times. Few minor rubs on the frame. Spec is: -Frame: Size Regular -Forks: Fox Float 32 FIT RL 15mm bolt-thru upgraded with enduro seals and replaced and cleaned on last ride (hasn't been used since) -Brakes: Shimano Saint m800 brakes -Headset: Hope -Handlebars: Eason Havoc DH bar, some cable rub on bar -Stem: Thomson Elite X4 60mm -Grips: Nukeproof grips with Nukeproof end caps -Crankset: Shimano SLX -Chain Device: E13 SRS -Chainring: Renthal 38T -Mech: Sram X0 rear mech Short Cage (20th anniversary) -Shifter: Sram X0 -Cassette: Sram PG 990 -Chain: Sram -Saddle: SGD Bel Air -Seatpost: SDG I Beam -SeatClamp: Giant Seat collar -Tyres: Maxxis Holy Roller 26 -Wheelset: Hope Pro 2 hubs, Front Rim Mavic EX 729 Rear Rim 721 -Pedals: Nukeproof Proton Alloy-Ti Flat Pedals -Skewer: Hope Thumb shifter part on the mech shifter is broken, its not expensive to replace or I can supply an X9 shifter. Will consider swap for an all mountain / Enduro Bike

Gamut P40s chain guide and bash guard Only used a hand full of times on my street bike. ISCG old works with 34-40 tooth chainrings the Boomerang is straight. the guides in working order The Bash guard is in good order Also it comes with taco so can be used on ISCG 05