jakekenney

Brand new large 2022 Marin San Quentin 1 in silver. Professionally assembled and will be professionally packed if shipped.

Well kept, mechanic owned 2020 Marin San Quentin 3 with meaningful upgrades. Has some scratches here and there but overall is an 8/10 condition. Will come with fresh sealant. Saddle not included. Stock build except: -Shimano MT501 4 piston brakes -200mm front rotor -Rockshox Pike RCT3 140mm with 2 rides on it!! -WTB Vigilante 27.5 x 2.6 Tough Casing front tire -WTB Trail Boss 27.5 x 2.6 Tough Casing rear tire w/ Huck Norris Insert -Crank Brothers Stamp small pedals See the stock build here: https://www.marinbikes.com/bikes/2020-san-quentin-3

Brand new medium 2021 Marin Rift Zone 29 C1. Set up tubeless, will ship with fresh sealant. Buyer pays shipping. FRAME All New Unidirectional Carbon Fiber Front Triangle, Series 4 Alloy Rear End, 29” Wheels, 125mm Travel, MultiTrac Suspension Platform, 148x12mm Boost Thru-Axle, 73mm Threaded BB w/ ISCG05 Tabs FORK Marzocchi Bomber Z2 29", Rail Damper with Sweep Adjustment, 130mm Travel, Kabolt Bolt-On Axle, 44mm Offset SHOCK Fox Float DPS, Performance Series, EVOL Air Spring, 3 Position Compression Adjustment, Rebound Adjustment, Custom Tune, 210x50mm, M8x30mm Top, M8x25mm Bottom RIMS Marin Aluminum Double Wall, 29mm Inner, Sleeved Joint, Disc Specific, Tubeless Compatible HUB REAR Forged Alloy, 148x12mm, Quad Sealed Bearings, 32H, Standard Freehub Body HUB FRONT Forged Alloy, 110x15mm, 32H SPOKES 14g Black Stainless Steel TIRES Front: Maxxis Minion DHF 29x2.5", 3C MaxxTerra, EXO+, Tubeless Compatible Rear: Maxxis Minion DHR II 29x2.4", 3C Maxx Terra, EXO+, Tubeless Compatible DERAILLEUR, REAR Shimano SLX SGS, Direct Attachment, 12-Speed DERAILLEUR, FRONT - SHIFT LEVER Shimano SLX, 12-Speed, SL-7100R CRANKSET FSA GRID, Modular 1x, 32T Direct Mount Chainring, MegaTooth Technology, Mego EXO Spindle, Boost Spacing BOTTOM BRACKET Mego EXO 73mm BSA CHAIN KMC X-12 Silver and Black CASSETTE SunRace, 12-Speed, 11-51T, ED Black BRAKES FRONT Shimano MT420, 4-Piston Hydraulic Disc Brake, 203mm Rotor BRAKE REAR Shimano MT420, 4-Piston Hydraulic Disc Brake, 180mm Rotor BRAKE LEVERS Shimano MT4100 Hydraulic Lever, I-Spec EV Compatible HANDLEBAR Marin Mini-Riser, 6061 Double Butted Aluminum, 780mm Width, 28mm Rise, 5º Up, 9º Back STEM Marin 3D Forged Alloy, 35mm GRIPS Marin Single Clamp Locking HEADSET FSA No 42/47, Sealed Cartridge Bearings, 1 1/8" x 1 1/2” SEATPOST X-Fusion Manic, 1x Composite Remote, Size S 125mm Travel, Size M and L 150mm Travel, Size XL 175mm Travel, 30.9mm SADDLE Marin Speed Concept EXTRAS Bolt-On Thru-Axle

Selling the best bike I've ever owned to try something new. This is a 2016 Specialized Stumpjumper FSR Carbon 27.5 in orange, and it's a BRAND NEW FRAME! I cracked the old one and had it warrantied. The new one hasn't been ridden besides a couple wheelies on the block. The benefit of this is that everything was just reassembled with new cables and a brake bleed. The grips pictured won't be on there - I'll throw some ODI Longnecks on unless you say not to. This was mostly a trail bike, but I also had a few lift days on it. It is a true do it all bike and will make someone very happy. So this bike has a lot of good, including the I9 hubs, the swat tool on the bottom of the top tube, the swat box, new headset bearings, a carbon front rim, new rear pads and rotors, and an amazing color scheme. There are also a few bad things about it... the main being that the fork stanchion has a scratch, which is pictured. It was the result of someone not picking up their dog's shit on the trail. The fork's performance hasn't been effected at all, but it is there. The rear rim also has a dent. It still seals and is structurally fine, but it is there if you look hard enough. Also, the top pawl in the dropper sometimes slips. It doesn't happen often, and is usually when its below 50 degrees. I was going to fix it, but it never annoyed me enough. Here are the specs: Frame: Specialized Stumpjumper FSR 27.5 Carbon Fork: Rockshox Yari 160mm Shock: Fox Float CTD Brakes: Shimano XT M8000 (new rear pads and rotors) Crankset: Shimano SLX 32t Bottom Bracket: Wheels Manufacturing Derailleur: Shimano SLX 11sp Shifter: Shimano XT M8000 Cassette: Shimano SLX 11-46t Hubs: Industry Nine Torch Rims: Light Bicycle Carbon front / Stan's Arch rear Stem: Chromag 35mm Bars: Chromag Fubar 760mm Seatpost: Specialized Command Post IRcc I'm asking $2300 but am open to offers. I'm happy to answer any questions or take more detailed photos. Will ship at buyer's expense.