jhkvt

Large Yeti SB4.5C. 114mm rear travel. Designed for 140mm fork. "Trail Tune" shock. 1x only. Includes Cane Creek Forty headset (bearings might be near end of life), 1-season old XT bottom bracket. Linkage bearings all replaced roughly 3 years ago. Jar of touch-up paint (I never tried to apply it) and extra derailleur hanger included . All internal cable routing. I am second owner. There are plenty of scratches and a few nicks, I have tried to depict in photos. I would say the most scratched areas are around the chainstay/seatstay junctions at the rear of the rear triangle. Let me know if there is an area of the frame you would like to receive a clearer photo, or we can even do a Zoom inspection. I had a different shock on for the last 2 seasons I rode the bike, so the DPS shock was resting on a shelf during that time. The frame was listed in Pinkbike a few months ago, when someone messaged me asking whether a mark on the underside of the crossbar which joins the chainstays (i.e., behind the bottom bracket shell) could be a crack. Bike shop couldn't say for sure so I sent the frame to carbon repair shop and that shop had to sand down the paint to inspect, found no crack, and repainted. He did not have 100% perfect color match, but since it was the bottom of the bottom bracket, I said go ahead. You can see the slightly different color in the photos. The carbon repair shop also eyeballed rest of frame for me and advised there is nothing that looks like a possible crack. Email from shop is in photos. One other hard-to-see item is the non-drive side (L) of the top tube, where it meets the seat tube, shows an outline of an old "Shimano" decal from the prior owner; it is faintly visible in photos. I will pay for shipping if asking price is met. Will accept $100 less for local pickup around Burlington VT area.

Fox Float DPX2 3-Pos-Adj Evol LV Rear Shock 2019 - 7.50 x 2.00. Purchased Oct. 2019 new for Yeti SB4.5c, so ridden approx. one season. It was a great upgrade but I'm selling that bike. Can email you Bikebling receipt for shock purchase. One cosmetic nick on the small air can. Ground shipping free with asking price.

Fox Factory 34 mm. 51mm offset. Good condition. Came with 2016 Yeti SB4.5c when I bought the bike as 2nd owner in late 2016. Approx. 6.5" steer tube. Some scratches on lowers and a nicks in the kashima uppers - SEE UPDATED PHOTOS as I wanted to make sure to show the nicks in the uppers. There is also brake cable rub on the inside of the left lower, also shown in photos. Last overhaul was Nov. 2018. Seal kit, seal seating tool, and 20 oz of Fox Fork gold fluid included with fork purchase. FYI, from when I bought it from orig. owner on Pinkbike, fork looks like it had a new crown installed b/c serial number shows it is a replacement crown. So, I can't personally vouch model year is accurate. Shipping flat $40. I am catching-up responding to emailed messages today (Feb. 13).

XT M8000 / SLX M7000 Traction Chainring 30t. 3 rides of use, great condition. I will pay shipping within continental USA. From One-Up website: ONEUP YOUR CLIMBING PERFORMANCE AND CLEAN MORE CLIMBS WITH OUR OVAL CHAINRINGS. Our Oval design has 3 main benefits; traction, traction and more traction. Forget any of the power gain claims that you've heard from the road side of the sport. For mountain, oval rings provide a more constant torque to the rear wheel thereby reducing spinouts and stalls on tough climbs. Get ultimate traction by smoothing out the torque you deliver to your rear tire 12% ovality (32T is equal to a 30T-34T range) 115° clocking from crank arm puts the major axis in your power stroke Narrow Wide tooth profile eliminates chain drop with the perfect chain mesh fit Saves over 30g versus stock ring (32T) Perfect chainline 49mm (corrected from stock 50.4mm) for a quieter drivetrain with improved chain wear and best drop performance. Includes shims to allow compatibility with your stock Shimano 1X or 2X hardware (no need to buy a new bolt pack) Aggressive crud chamfers for awesome mud shedding performance and extended ring life. Reinforced Wide tooth design provides maximum ring durability when run without a bash. Made from 6mm hard wearing 7075-T6 aluminum plate SPEC Material: 7075-T6 Chainline: 49mm Chainline Explained Weight: 46g (30T), 56g (32T) Compatible with: 9, 10, 11 and 12 Speed SRAM Chains (not compatible with 12 Speed XTR Chains) Colour: Black 11 speed Shimano XT M8000 1X and 2X armsets 11 speed Shimano SLX M7000 1X armsets 11 speed Shimano MT700 2X armsets NOT Compatible with: 10 speed Shimano XT armsets Colors: Black Installation: Align the small bump (small hole on direct mount rings) on the inner edge of the ring with your crank arm