ScottMoore94

Hi, I'm selling my much loved, "Nomad". I've owned since new, purchased the frame through finance whilst working full time and built the bike up to my dream specs! I have raced this bike for a few rounds of the Hope Tech PMBA Enduro Series, events local to me. Loved every minute of it! As does the bike! Mostly ridden local trails and some DH (This bike loves the lakes!) Sadly it's going to have to go, however, as I'm learning to drive and need the cash... Once finished it'll be time for a new bike of course! Maintained to the highest standards, always, no expense has been spared on this bike.. Though it doesn't cost as much when you're a qualified cycle technician! Spec is as follows: Large Santa Cruz Nomad CC 2015 - 165mm travel 650b VPP frame, user serviceable lower pivot bearings (grease gun included) integrated chainstay and downtube protectors. Also fitted with RockGuardz carbon downtube armour. INVISIFRAME FITTED FROM NEW it must be spotless under there! Some slight damage to the top tube where invisiframe did its job against a brick wall during cleaning. Frame is very good condition otherwise! Headset - Hope Tech Mix & Match Black 44mm cups (new bearings) BB - Hope Tech Red 73mm threaded (like new) Rear Shock - RockShox Monarch RT3 Plus DebonAir (comes with bottomless tokens) Fork - Fox Factory 36 FIT R2C2 2015 170mm (comes with volume spacers and 15mm axle conversion) Seatpost - RockShox Reverb Stealth Saddle - Fabric Scoop Shallow Radius Wheels - Spank Oozy 295 Trail rims, laced to Hope Pro2 Evo hubs (20mm front, chrome) using DT Swiss Double Butted Spokes and built using FireEye Gold Alloy Nipples. Gorilla taped for tubeless but currently running tubes! Tires - Maxxis Shorty 2.5 DH casing MaxxPro compound (cut down, also have full tread spare tyre) Plus, Kenda Nevegal Tomac Pro Dual compound on the rear Crankset - Sram XX1 Carbon cranks 170mm, fitted with direct mount, Blackspire, 34t chainring (Also have RaceFace 32t ring for it and the spider to fit normal 4-bolt rings) Pedals - NukeProof Horizon Sam Hill flat pedal (like new) Drivetrain - Shimano XT M8000 11spd with OneUp components Shark Tooth expander kit and derailleur cage. INCREDIBLE 11-50t spread!! (barely used) Brakes - Front brake is a Shimano Zee system matched to a 203mm UberBike floating vented rotor, Rear is SLX 2-pot and matched to 180mm UberBike floating rotor. Moto style ;) Stem - choose either 50mm Spank Spike Race stem or 60mm Gusset stem (as pictured) both in 31.8mm guise Handlebar - choose either 760mm Superstar Lithium carbon bar (BLACK, pictured) or GREEN Spank Oozy Race VibroCore 760mm bar. 25mm and 15mm rise each, respectively Grips - Ergon GE1

Used only a couple of times before I realised 35mm was too short for my bike build. Very nice stem high quality. Spotless. Will post anywhere in UK

Like new condition. Only fitted to my bros bike for a couple of rides before he decided his old setup felt nicer! I also have his Aluminium FatBar 35 which is cut to 770mm.