2009 Scott spark 20 carbon frame in medium (26") with differ

This is frame only no wheels or forks included

This frame a has the usual scrapes but has been protected from new with helicopter tape. There are rubs on the inside of the chain stays on one side due to a tyre catching and on the top tube due to the bottom of the shifters. These are not deep and would not affect the frame.
It was once run with a loose back wheel and the of the dropouts was slightly deformed, This was repaired with a specially machined plate which has worked for years, see picture. Due to this the dropout width is over 135mm so some qr skewers won't work - I recommend either a 10mm through axle or one that was machined specially to be longer if you need 5mm qr.
All pivot bolts have been swapped for titanium and an official Scott red anodised alloy bolt set ( I still have the old gold ones)

The basic frame cost is £270 including an extra mech hanger a kcnc seatpost clamp and the original Scott qr clamp. A hope rear post mount brake (160mm) adapter with ti bolts.

£150 extra with a new boast valve rp23 (2011) that I bought from the states and had tuned to suit the frame by loco tuning last week (receipt included)f
or
£30 extra If you want it with old fox float rl shock that is well worn but works well and holds air. This shock has a very strong lockout and suits the frame.
Extras:
Front mech: Dura-ace down pull 9 speed. £25
Seat post Climax carbon post 34.9mm 149 grams - lightest post that costs less than £200 I could find £55
mortop semi integrated headset in red. weight 66 grams £20
Carbon/ titanium qr skewers , in red to match the rest, machined to suit rear 39 grams £18