2013 Cube Hanzz Race

Details are:

•Cube Hanzz Race - Large - I am 6' and I find the geometry to be very good.
•HPA 7005 Advanced Hydroform FR Triple Butted, FSP 4_Link_System, X-12
•Maxxis 2.35 dual ply tyres - Very good condition.
•Alex Supra D rims on Formula hubs - Very good Condition, straight and true.
•Front Brake: Formula The ONE FR 203mm
•Rear Brake: Formula The ONE FR 180mm
•Front Hub: Formula 20mm
•Rear Hub: Formula X12
•Rear Shock: FOX Evolution Van RC 550x2.80 - 190mm
•Fork: Fox 36 Van RC 180mm, 20mm through axle
•1x9, Saint mech, Race Face cranks and Nukeproof pedals - pins in good order but a few scratches on the pedal body
•Nukeproof Warhead 760 Riser Bars - Special Edition 2013 - Brand New, never ridden.
•Suntace DH stem
•Cube Fritz grips - Brand New, never ridden.
•Frame tape on forks and downtube.
•Seatpost: Syntace P6 Alloy 31.6mm

Some other points:
•The tyres in the picture are single ply. The dual plys have recently been ridden in Morocco and are dusty. I wanted to use the singles in the pictures
•There is a very small indentation on the underside of the downtube near the cable management lug. Some dirt has collected around the frame tape, it is not rust. Please see attached pictures.
•I have also included a picture of the frame numbers for reference and theft checks.
•I replaced the rear mech hanger, which incorporates the axle, so the colours are a slightly different blue. It really is not that noticeable but I was unable to get exactly the same colour from a Cube dealer.
•Both the forks and rear shock have been recently serviced by Nick @ pedal-worx.co.uk.

The bike is in very good condition. I purchased it used from a local rider and have only used it twice in around six months. I am selling it as I don't have the time for more than one bike, so one has to go. Local pickup from Reading. I am relocating this weekend. Bike is located in Reading.