2013 Santa Cruz Nomad C XX1/XO1, Pike, Monarch

Previous generation Nomad C for sale here. Mechanic owned & maintained, ridden for 2 summers (first one maybe got ridden 10 times due to a lingering injury), and got a full parts swap between the summers so the parts kit on the bike has 1 season on it while the frame (sort of) has 2. I just rebuilt the bike from the frame up, cleaned all pivot bearings, headset, fork lowers/seals, rear shock air sleeve, etc. Tires are used but not dead yet and the rear rim does have 1 dent that has still been running fine tubeless as long as you run "ghetto" tubeless. I did purchase this frame a couple weeks before Santa Cruz started sending frames with holes drilled for Stealth seatposts and, after a chat with Santa Cruz engineers, I drilled a hole in the frame to accommodate that. If you have concerns about that, I'm happy to reassure you on it's strength. As photoed 28 1/4 lbs! Parts list below.

Specs:
Previous Generation Santa Cruz Nomad C purchased May 2013 Lime Green Size Large Seat Tube Drilled for Reverb Stealth
Cane Creek Angleset (Currently running the 1.5 degree cups but I have all of the others, the 1.5 cups give the bike about a 65.5 degree head angle)
Rockshox Monarch Plus Debonair
Rockshox Pike 26in 160mm
Rockshox Reverb Stealth 30.9 150mm travel
Sram Guide RSC brakes with 180mm HSX rotors (I have the brand new guide rotors if you'd prefer them over the HSXs and I think I have some different sizes... not sure though)
Sram XX1 175mm Carbon Crank (currently has 32 tooth XX1 ring but I have other XX1 rings)
X01 10-42 Cassette
X01 Rear Derailleur
E-thirteen XCX ISCG 05 top chain guide
Sram Rail 50 UST Wheels 142X12 (rear) 15mm TA (front) 26 inch
Truvativ AKA Stem 50mm
Boobar Handlebar uncut 780mm
ODI Rogue lock on grips
Maxxis Minion F EXO 2.5 Front tire
High Roller II Exo 2.4 Rear tire
*pedals not included

PM or email bngofast at yahoo dot com with questions or inquiries.