Scott Voltage FR - Fox 36 Van RC2 - "long" size (M/L)

Selling my Scott Voltage FR.

The frame is size M/L, I am 5'10" and loved the sizing. The Voltage was offered in two sizes only, "short" and "long" with the same seat-tube length and this is the larger of those. I'd say it'd be suited for anyone 5'7" to 6'1" depending on how long/short you like your frame.

The bike can bet set up in different modes: 180mm, 170mm, 160mm and 135mm depending on the shock length. I'll include the appropriate shock mounts and a second set of dropouts.

The frame has signs of use as is to be expected from a freeride frame but no dents are cracks. I cleaned the frame and could not find any. The bottom of the downtube and chain/seatstays were covered with MX protective foil and the paint looks good. Unfortunately, the frame being white there's some dirt that rubbed in and the frame has some milder discolorations but not nearly as bad as the old white 888s.

This was a custom build that I purchased with the Vivid Coil, the components are listed below. I have a couple shocks on offer with it -- took a picture with each. I used to mainly ride the Vivid Coil with the frame, found that to work well enough. The CCBDA was a little too progressive for my riding style but good for big hits, but that's beyond my skills so the Vivid worked better for me. Please check out the pictures and feel free to ask for additional detailed shots.

- $1600 with Rockshox Vivid Coil 9x3.0 (180mm travel rear)
- $1700 with Cane Creek Double Barrel Coil (CCDB) 8.75x2.75 (about 170mm travel, comes with correct shock mount)
- $1850 with Cane Creek Double Barrel Air (CCDB Air) 9.0x3.0 (180mm travel rear)
- $1900 BOS Stoy ST01 tune 9.0x3.0 (180mm travel rear)

Build:

- Fork: Fox 36 Van RC2 with Kashima coating, a few minor scratches, mostly on stickers - stanchions are clean
- Drivetrain: SRAM X9 shifter and rear derailleur
- Cranks: Shimano Saint cranks, with E.13 32t ring
- Brakes: Avid Code R (latest generation, not sticking) with 200mm rotors
- Handlebars: Odi flight control bar 780mm wide
- Stem: Truvativ Hussefelt
- Wheels: Mavic Crossmax SX wheelset (I mostly rode another wheelset so these are in good shape)
- Tires: Schwalbe Big Betty UST tires (rear may need new sealant and side-knobs have some tears but are still clinging on)
- Chainguide: E.13 LG-1

Feel free to ask me any questions. I've tried to take as detailed pictures as possible, please check 'em out.

Geometry:

Headangle: 65.0 deg
Reach: 404mm / 15.9 in
Stack: 600mm / 23.6in
CS length: 425mm / 16.7in
BB height: 348mm / 13.7in
Wheelbase: 1159mm / 45.6 in
Headtube length: 118mm / 4.6 in
Toptube horz: 582mm / 22.9 in
Seatangle: 73.3 deg
Seattube length: 365mm / 14.4in


Bike setup options:

(http://www.pinkbike.com/forum/listcomments/?threadid=81521)
Standard shock sizes:
241mm = 76mm stroke
222mm = 70mm stroke
215mm = 63mm stroke

The following will apply with the standard shock sizes above:
Standard setups:
241mm shock mount and shock to get 160 and 180mm travel options (standard on Voltage FR20 and FR10 models).
222mm shock mount and shock for 150 or 170mm travel options (standard on Voltage FR30),
215mm shock mounts, and a 215mm shock will give you 135 or 150mm travel.

Special setups:
222mm shock + 240 shock mount gives you 170mm (long) 150mm (short) of travel, slackens/lowers the bike.
215mm shock mounts and a 200mm shock equals 110mm travel
222mm shock mounts and a 215mm shock to get 135mm travel


Shipping is around $100 within the continental US.