2015 Stans Flow EX to DMR FRT and Canfield RR

Stan's Flow EX rims to a DMR front hub, 15 x 100 black end caps installed but I do have another set in red. I also have the adapters to run it 20 x 110. These are included. The rear is Stans Flow EX to a Canfield Brothers rear hub that uses the Shimano Capreo design. 12 x 142 spacing. I am also including the cassette as well which is bastardized ball of awesomeness. Bottom four are Shimano that go all the way down to a 9 tooth. Middle three are SRAM to fill the gap and the top three are a General Lee adapter that goes up to a 42 tooth. 10 speed. Rims have no significant damage just normal small scratches and such. Cassette is also good to go with many miles left. If you have any questions shoot me a PM.