Specialized Enduro Evo Expert Medium
Category: Enduro Bikes
Frame Size: M
Wheel Size: 26"
Frame Size: M
Wheel Size: 26"
Original Post Date: Mar-14-2016 8:33:46
Last Repost Date: Mar-20-2016 4:13:26
Still For Sale: Sold
View Count: 458
Watch Count: 3
Last Repost Date: Mar-20-2016 4:13:26
Still For Sale: Sold
View Count: 458
Watch Count: 3
My trusty Specialized Enduro Evo 26" in medium.
Had this a few years, unfortunately whilst it is mega fun on the downs I could never really take to it as an all-mountain/XC bike (my fitness is not great), not long after purchase I also bought myself a feather light 29er bike that was my main do-it-all bike. In an attempt to lighten this bike and made it more useable to me it has been upgraded over stock and very well looked after (I'm an ex-cycle mechanic), this bike has had a VERY easy life!
Spec as follows...
Specialized Enduro Evo Alloy Medium frameset, little bit of cable rub and the odd stone chip, absolutely no dinks, dents or bends & has spent most of its life with protective tape on, all bearings smooth and no play - traditional BB, taper headtube, 30.9 seat tube.
Fox Factory 36 Air, 160mm RLC forks - whilst these were purchased about 6 months ago, they have been on 4 rides only due to me riding my other bikes - in my view AS NEW.
Fox DHX RC2 rear coil shocker that gives 160mm travel, currently with a 600lb spring, I have a 550lb spring also that will go with the sale.
Specialized Roval Traverse/DT swiss wheelset setup for tubeless, choice of tyres with the sale, Maxxis Advantages, Nobby Nick Tubeless, Wetscreams etc (can throw a load in with sale if desired as moved onto waggon wheels now)
Raceface Atlas crankset 170mm, Raceface BB, spin sweet and no chunks out of them.
Raceface Atlas bars, approx. 720mm width.
Planet X 60mm stem - if this isn't your thing then talk to me and I can easily fit longer/shorter stem to suit you.
Factory FSA headset with taper bearings, all run smooth.
Sram X1 1x11 groupset, 10-42range cassette, 32T front Raceface thick/Thin ring (can change this to 30 or 34 tooth for sale if you wish) - will also include the old front mech/shifter if you wish to increase gearing.
Sram X0 brakeset, these are match-made to the shifter, plenty of meat left of the pads.
Specialized Henge saddle
THIS BIKE WILL NOT COME WITH THE REVERB SEATPOST AS PICTURED OR PEDALS, I can if you wish, provide a normal style post and set of DMR V8 flat pedals if you wish but anyone riding a bike of this calibre will probably want to choose pedals and post to suit them.
£950.00 ONO, will also deliver in Nottinghamshire, Staffordshire, Derbyshire and south Yorkshire - *** I WILL NOT POST SO DO NOT ASK - CASH/MEET ONLY ***
If you are interested in buying this bike as a rolling chassis (frame, fork, wheelset) then please talk to me about an offer. This is a LOT of bike for the money, the forks alone cost a fortune new!
Tom
Had this a few years, unfortunately whilst it is mega fun on the downs I could never really take to it as an all-mountain/XC bike (my fitness is not great), not long after purchase I also bought myself a feather light 29er bike that was my main do-it-all bike. In an attempt to lighten this bike and made it more useable to me it has been upgraded over stock and very well looked after (I'm an ex-cycle mechanic), this bike has had a VERY easy life!
Spec as follows...
Specialized Enduro Evo Alloy Medium frameset, little bit of cable rub and the odd stone chip, absolutely no dinks, dents or bends & has spent most of its life with protective tape on, all bearings smooth and no play - traditional BB, taper headtube, 30.9 seat tube.
Fox Factory 36 Air, 160mm RLC forks - whilst these were purchased about 6 months ago, they have been on 4 rides only due to me riding my other bikes - in my view AS NEW.
Fox DHX RC2 rear coil shocker that gives 160mm travel, currently with a 600lb spring, I have a 550lb spring also that will go with the sale.
Specialized Roval Traverse/DT swiss wheelset setup for tubeless, choice of tyres with the sale, Maxxis Advantages, Nobby Nick Tubeless, Wetscreams etc (can throw a load in with sale if desired as moved onto waggon wheels now)
Raceface Atlas crankset 170mm, Raceface BB, spin sweet and no chunks out of them.
Raceface Atlas bars, approx. 720mm width.
Planet X 60mm stem - if this isn't your thing then talk to me and I can easily fit longer/shorter stem to suit you.
Factory FSA headset with taper bearings, all run smooth.
Sram X1 1x11 groupset, 10-42range cassette, 32T front Raceface thick/Thin ring (can change this to 30 or 34 tooth for sale if you wish) - will also include the old front mech/shifter if you wish to increase gearing.
Sram X0 brakeset, these are match-made to the shifter, plenty of meat left of the pads.
Specialized Henge saddle
THIS BIKE WILL NOT COME WITH THE REVERB SEATPOST AS PICTURED OR PEDALS, I can if you wish, provide a normal style post and set of DMR V8 flat pedals if you wish but anyone riding a bike of this calibre will probably want to choose pedals and post to suit them.
£950.00 ONO, will also deliver in Nottinghamshire, Staffordshire, Derbyshire and south Yorkshire - *** I WILL NOT POST SO DO NOT ASK - CASH/MEET ONLY ***
If you are interested in buying this bike as a rolling chassis (frame, fork, wheelset) then please talk to me about an offer. This is a LOT of bike for the money, the forks alone cost a fortune new!
Tom
Warning: This listing is out of date. You must Edit this item before you can repost!"
£950 GBP
Restrictions: Reasonable offers only, No Trades, Will ship locally only
Nottingham, United Kingdom Related Listings
|
|
Sidney, British Columbia
|
|
Carlsbad, California
|
|
|
|