2016 Santa Cruz V10CC

Up for sale is a brand new 2016 Santa Cruz V10CC frame. This is the lighter/higher quality V10 frame. This is a light and crazy fast frame which retails for $3600, save big!!!

http://www.santacruzbicycles.com/en/us/v10

As per Santa Cruz...
When the time came to examine whether to give the V10 27.5-inch wheels, we turned to the Syndicate, who rode the prototypes, gave us feedback, and ultimately raced the bike on the World Cup circuit. By the time the season was over, the new bike had garnered the 2014 World Cup title, and a World Champs medal. Those accolades speak for themselves, but we were eager to improve.

Drawing on feedback from Peat, Minnaar and Bryceland on their personal settings, the 6th generation of our flagship model now offers 216mm / 8.5” of travel in two adjustable geometry positions:
High: 64° headtube angle / 360mm bottom bracket height.
Low: 63.5° headtube angle / 353mm bottom bracket height.

The shock rate has been tuned to be more linear and deliver consistent damping throughout the travel. Carbon lay-up analysis and frame shape optimization allowed for more efficient use of material, and the savings were then reinvested into other areas to ensure the bike withstands Ratboy’s huge flat landings. The front triangle and swingarm sport larger-diameter sections, but we’ll refrain from the usual drone about the positive effect that has on strength and stiffness. The new frame benefits from a slightly longer reach to suit evolving rider preferences. However, our athletes felt we always struck a good balance with our chainstay length, so we focused on maintaining this dimension when accommodating larger wheels.

This CC-level carbon frame is every bit as stiff and strong as our C-level frame, but weighs about 280 grams less, due to the use of some lighter, stronger, and more expensive carbon fiber. Using this material in key places allowed us to use less material overall, which is what shaves nearly a pound from the frame.

Features and specifications:
Full carbon frame and swingarm
Carbon C and Carbon CC frame options
216mm (8.5") VPP suspension
27.5" wheels
Adjustable geometry with HIGH & LOW settings
Double sealed pivots for long bearing life
Dual grease ports on lower link for easy maintenance
Integrated fork bumpers with cable guide
Molded clip-on chainstay and upright protector
Full carbon dropouts and disk mounts
Angular contact bearings maximize stiffness
Collet axle pivots lock in place without pinch bolts
Molded rubber swingarm and downtube protection
157mm rear axle spacing
Threaded Bottom Bracket
ISCG-05 tabs for chainguide compatibility
Sizes: L