2015 Trek Superfly 8

Looking to get a mountain bike for riding Stewart and our other local hot spots without spending half a years income? How about this - I have a 2015 Trek Superfly FS 8 lightweight aluminum framed 29er that I purchased in 2016 as a left over that has only been lightly trail ridden in the local area. This is a extremely clean lightweight full suspension XC/ trail bike with very little time on it. I've listed the specs on the bike so you can see that it has some very good parts on it - with 100mm of plush suspension front and back - and upgrades - NOT BAD! If you have any questions please feel to call.

Bike build:

**Frame: 2015 Trek Superfly FS 8 med/large 18.5"actual (19.5" virtual ) 29er- Alpha Platinum Aluminum, ABP Convert, E2 tapered head tube, internal derailleur & dropper post routing, press fit BB, Flow Mold carbon swing link, G2 Geometry, 100mm travel.
**Front fork: Upgraded from stock- Rock Shox Reba- 100mm travel with remote handlebar lockout.
**Rear shock: Fox Float CTD- 100mm travel, factory tuned for this frame, Fox's Climb, Trail, Decend adjustable three mode dampener.
**Drivetrain: Full Shimano SLX 2x10 crankset, shifters, and derailleurs. The chainrings are 28-24 tooth Shimano chromoly chainrings in front and Shimano SLX 10 speed cassette in the rear with a spread of 11 to 36 tooth gears.
**Brakes: Shimano SLX hydraulic disc brakes with 160mm front and rear rotors.
**Wheels: NEW/UNUSED Sun Ringle Inferno 23- w/cyan blue decals to match frame, 100x15mm front axle, 142x12mm rear axle, standard HG freehub, six bolt brake rotor mounting. (I was using a carbon wheel set on the bike which I am keeping)
**Tires: Bontrager XR1 TLR Team Issue 29"x 2.20"- low rolling, densely packed knobs for efficiency and speed.
**Handlebars: Bontrager RL aluminum riser bars- 31.8mm clamp diameter, 15mm rise, 4 degrees up, 9 degrees back, and 690mm length.
**Stem: UNO ULTralite aluminum- 50mm length, reversible to set angle up or down
**Grips: Specialized Half Waffle- lock on's.
**Seat: Bontrager Evoke 2- chromoly rails.
**Seat post: Upgrade from stock - KS eTEN Dropper - 100mm hydraulic dropper seat post, w/remote handlebar lockout.
**Pedals: Poly test pedals included.
**has Marsh-guard front fender.
**Weight: 29 lbs 15 oz with pedals.
**Fully assembled, tuned, and ready to ride. has NO ISSUES - just get on and go!
** I'm 5'8" and the bike fits me perfectly as it is set up now . Bike is owned by mechanic enthusiast - it is much cleaner than usual with some great add-ons. Might consider interesting trades.

Bike can be seen at my business address listed below 9am to 6pm daily

Chip @ 845.564.o63o
Sherwoods Power Equipment
1775 rte 300 newburgh ny 12550
Sell for $1995.00 -could accept Mastercard or Visa but would have to add sales tax - if it helps you.