Category: Enduro Bikes
Frame Size: L
Wheel Size: 27.5" / 650B
Material: Carbon Fiber
Original Post Date: Apr-19-2017 4:31:02
Last Repost Date: Apr-24-2017 8:25:48
Still For Sale:
Sold
View Count: 600
Watch Count: 1
****UPDATE****
I LOWERED THE PRICE OF THE BIKE - NEED TO GET THIS OUT OF MY GARAGE.
I ALSO HAVE A CARBON 29 INCH NOBL 36 WHEELSET (INNER WIDTH OF 30) ON HOPE 2 EVO HUBS THAT YOU CAN BUY IN ADDITION TO THE PLUS WHEELS. PRICE FOR THE 29ER SET IS $700 WITH THE PURCHASE OF THE BIKE. LAST PICTURE IS THE BIKE WITH THE 29 INCH NOBL WHEELSET...
Nearly new SB5+. I've decided to consolidate to one bike so this one is on the block. Less than 100 miles on it. I built this up before Christmas and with the rains here in California, the bike got rarely ridden. Literally about 6-8 rides. So the frame looks basically new with the exception of one minor issue. On my last ride a rock got lodged in the rear linkage and took the top of the clear coat off near that area. Very tough to see. I actually met the Yeti team at a demo day and had them look at it and they said there was no structural issue. They suggested that I use a Sharpy marker to darken the area and apply some clear nail polish to make it look "better". I did but honestly the clear coat is shiny and the regular finish of the frame is matte so it doesn't look terrific. But like I said early, it's in an area that is not very visible.
Here are the details of the build:
Specs:
Frame: Yeti SB5+ Turq Edition, size Large. Yeti protection tape applied.
Front suspension: MRP Stage with 150mm of travel. The axle to crown length is within 2mm of the OEM spec'd Fox 34. Non-boost format. Phenomenal fork!
Rear suspension: Fox DPS Kashima
Wheelset: Atomik Carbon Chubbie carbon rims (36 internal width, 43 external), laced to Industry Nine (i9, Industry 9) GOLD hubs (just for a little bling), Sapim Race spokes (I believe, but they may me CX-Ray). These wheels are great alternatives to Enve plus wheels. Very light, stiff and strong. Rear wheel is boost spacing 12x148 and front wheel is non-boost 15x100.
Front Tire: Schwalbe Hobby Nick 2.8 (less than 150 miles)
Rear Tire: Schwalbe Hobby Nick 2.8 (less than 150 miles)
Rear Shifter: Shimano XTR 11 Speed
Rear derailleur: Shimano XTR 11 Speed, minor scratch on the hanger
Crank: Race Face Aeffect, Cinch / direct mount with 28 tooth Race Face ring. This crankset has 1 ride on it of 10 miles.
Cassette: E13 / E Thirteen 9-44. The range combined with the 28 tooth front ring makes for awesome low and high end gearing.
Saddle: Specialized Phenom with cromoly rails
Seatpost: Fox Transfer Performance Dropper - 125mm
Handlebar: ENVE DH Bar cut to 780mm
Stem: Syntace MegaForce 2, 50mm
Headset: Cane Creek 40 IS
Brakeset: Shimano Deore XT 785
Rotors: Shimano XT IceTech Centerlock 180mm Front, 180mm rear
Grips: ODI
Let me know if you have any question. No low baller. Buyer to pay shipping and paypal fees.
Thanks!
Warning: This listing is out of date. You must Edit this item before you can repost!"
Restrictions: Reasonable offers only, No Trades, Will ship within country only