2014 Custom Built Santa Cruz Nomad - Mk 3 Carbon CC

For sale is my custom built, large, Santa Cruz Carbon Nomad that I'm selling to fund a new ride for 2017

The frame is the 3rd generation of the Nomad and is the full CC carbon version. Frame was bought new from Moose Cycles in London in July 2014 (I have the receipt) and then built up to custom spec as per below.

Full details with geo and frame details can be found here:

https://www.santacruzbicycles.com/en-GB/nomad

The details of the build are as follows:

Frame set: 2014 MK3 Santa Cruz Nomad; Full Carbon; Black with Stealth Graphics; 165mm rear travel; Santa Cruz Seat Clamp; Size = Large with DT Swiss 142/x12 rear axle; 27.5

Frame protection: Invisiframe

Shock: Choice of Rockshox Vivid Air (came with the frame, custom tuned) or Bos Kirk (bought at the same time as the frame and custom tuned for the Nomad) ;the other shock can be bought separately for GBP175

Fork: Fox 36 Factory RC2 Kashima with 20 mm axle

Fork protection: Invisiframe

Wheels: DT Swiss Hubs - Black; DT Swiss EX511 Rims - Black; DT Swiss Spokes with red alloy nipples

Tires: Schwalbe Magic Mary Super Gravity Evo ; 27.5x2.35; Front - Vert Star, Rear - Trail Star; Set up tubeless with red valves

Shifter: Shimano XTR 11 Speed

Rear Derailleur: Shimano XT 11 speed

Crankset and BB: Race Face Sixc 170mm with 32T Race Face Direct Mount Chainring - Black; and Hope BB - Black

Cassette: Shimano - 11 speed - 10-42 T

Chain: KMC Gold SL, 10 speed

Bash Guard: MRP AMG V2 Carbon Chain & Bash Guard

Saddle: Fabric Scoop - Black

Seat post: 9Point8 Fall Line, 150mm drop with 1x under bar remote

Handlebar: Race Face Sixc 780mm wide, 35mm, 20mm rise

Stem: Race Face Atlas 35mm 50mm length

Headset: Chris King - Red

Brakes: Hope Tech 3 V4 Brakes, black, braided hoses, Hope matchmaker brackets for seat post and gear shifter

Rotors: Uberbike 203mm F 203mm R; with black/red floating heat sink rotors

Grips: Race Face Half Nelson with Hope Grip Doctor bar end protectors

Pedals: (Choice of) Crank Brothers Mallet E, Black OR Burgtec Penthouse MK4 with Ti-Axles, Black (will add in the other set of pedals for GBP40)

Bike is in good condition overall with the usual cosmetic wear and tear - pls see the photos - and has been well maintained.

Please contact me if you have any questions or would like any details on the bike.

Paypal and local pick up preferred.