2013 YT Industries Wicked 650B (27.5") *PRICE DROP*

Large YT Industries Wicked 650B 160mm

Owned since new, this bike has served me excellently. It has always been well maintained and cared for, with a full strip down a rebuild every 6 months, along with suspension servicing when required (based upon No. of rides). I have worked in the cycle industry in the past, so have always been well equipped to main the bike. The forks last received a lower leg service around 8 months ago, since then it has only been ridden twice! Unfortunately I simply don’t get the chance to ride it anymore, with my hardtail seeing most of my attention.

This has been one of the very few bikes where I have been happy with the build spec out of the box, so little has changed from standard. It has been changed to a 1x10 setup, with a Raceface Narrow Wide 32T ring, supported by a Superstar XCR Direct mount chainguide for peace of mind. The original X9 front mech and shifter will also be included.

The bike will also come with the original YT Industries box and protective packaging that it was shipped to me with, in case it is of any use to the buyer. The overall condition is very good, with the usual age related marks to be expected. Any areas susceptible to cable or clothing rub I have tried to cover with protective pads or insulation tape, which will be removed for the sale.
Apologies for not having up to date pictures, the bike is currently stored at a family address, which I will return to on May 15th in order to give it a service.

The full spec is as follows:
Frame
YT Industries Wicked 650B 160mm – Size Large
Fork
Rockshox Pike RCT3 160mm
Shock
Rockshox Monarch RT3
Wheels
DT Swiss E1900 27.5”
Tyres
Continental Mountain King 2.4” (Soft Compound)
Crankset
Raceface Turbine Cranks with a 32T Raceface Narrow Wide ring
Seatpost
Rockshox Reverb Stealth 125mm
Front Brake
Avid Elixir 5 w/200mm rotor
Rear Brake
Shimano SLX w/200mm rotor
Shifter
Sram X9 10spd
Rear Mech
Sram X9 type II 10spd
Guide
Superstar XCR Direct mount chainguide
Bars
Kore 760mm low rise
Stem
Kore 50mm
Grips
Raceface Half Nelson
Saddle
YT Industries

Viewings welcome, located in Hook, Hampshire (M3 J5).

Would strongly prefer collection, although it can be shipped (unsure of cost).