2016 Specialized Stumpjumper Excellent Condition UPGRADES

Hey Pinkbike,

I have an epic Specialized Stumpjumper for sale. This was my personal trail bike so it's been meticulously taken care of and serviced. I have upgraded a lot to the bike, I'll put a list down below. Mechanically the bike is perfect and dialed in, not a thing wrong on the bike. Physically the bike is in very good condition, there are a few scratches but nothing that would harm the structural integrity of the frame. The suspension was just serviced and the bearings too. Pads and brakes are good, and the tires are brand new as well. I'm selling it because it's time to switch up bikes again, although this is an awesome climber and descender. If you think my asking price is a bit steep you can shoot me your offer...the worst I can say is no thanks.

Upgrades:

Tubeless front and rear.

Maxxis Minions front and rear

Renthal Fatbar 734mm Rise

Specialized Bennies flat pedals.

Specs are as follows:

FRAME

M5 alloy, Trail 650b Geometry, internal cable routing, 142mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, front derailleur compatible w/ Taco Blade, 150mm travel

REAR SHOCK

Custom FOX FLOAT Evolution CTD, AUTOSAG, Rx Trail Tune, 197x47.6mm

FORK

RockShox Revelation RC3 650b, Solo Air spring, 150mm travel, 3-position compression adjust, rebound adjust, tapered steerer, 42mm offset, 15mm Maxle Lite thru-axle

HEADSET

Hella Flush, 1-1/8" and 1-1/2" threadless, Campy style upper w/ 1-1/2" lower, cartridge bearings

STEM

Specialized XC, 3D forged alloy, 4-bolt, 6-degree rise

HANDLEBARS

Specialized, 6000 alloy, 8-degree backsweep, 6-degree upsweep, 25mm rise, 750mm, 31.8mm

GRIPS

Specialized Sip Grip, light lock-on, half-waffle, S/M: regular thickness, L/XL: XL thickness

FRONT BRAKE

Shimano Deore, hydraulic disc, resin pads

REAR BRAKE

Shimano Deore, hydraulic disc, resin pads

BRAKE LEVERS

Shimano BL-M447, I-spec compatible

REAR DERAILLEUR

SRAM X9 Type 2, 10-speed, mid cage

SHIFT LEVERS

new X7 10spd rear shifter, ball bearing design, zero loss mechanism

CASSETTE

SRAM PG-1030, 10-speed, 11-36t

CHAIN

KMC Gold Chain

CRANKSET

Custom SRAM S-1250, 7050 alloy arms, 10-speed double, PF30, 36/22T, 104/64mm BCD spider

BOTTOM BRACKET

SRAM, PF30, OS press-in bearings, sealed cartridge

PEDALS

Specialized Bennies

RIMS

Roval 650b, alloy, 29mm inner width, 24/28h

FRONT HUB

Specialized, Hi Lo disc, sealed cartridge bearings, 15mm thru-axle, 24h

REAR HUB

Specialized, Hi Lo disc, 4x sealed cartridge bearings, 12mm thru-axle, 28h

SPOKES

DT Swiss Industry, stainless

FRONT TIRE

Maxxis Minion DHF

REAR TIRE

Maxxis Minion DHR

INNER TUBES

TUBELESS

SADDLE

Body Geometry Henge Comp, hollow Cr-Mo rails, 143mm

SEATPOST

Command Post IRcc, cruiser control technology, micro-adjust height adjustable, alien head design, bottom mount cable routing, remote adjust lever, 30.9mm, S: 100mm travel, M/L/XL: 125mm

SEAT BINDER

Specialized, 7050 alloy, single bolt, 34.9mm