2016 Specialized Tarmac SL4

Here I have for sale, my beloved 2016 Tarmac SL4.

This bike has been used for mainly better weather miles as I have a dedicated winter bike.

I have all the original documentation.

The frame is in good condition apart from a few age related marks as to be expected. Most notable are the 2 marks/scuffs on the top tube where you can see white scuffing and marks in the paint finish. I have had these checked out by my local bike shop and was told they are nothing to worry about.

Underneath the down tube, there are some shallow superficial scratches.


The lucky new owner will benefit from a bike that has just been fully stripped down, serviced and rebuilt. The bike will not be ridden now in anticipation of selling.

During the service, a new a lower headset bearing was replaced. Full Shimano gear and brake cable outers and inners with polymer coating were fitted. Finally, some fresh new bar tape was wrapped.

The BB is BB30 press fit RS6806 Bearings with wheels manufacturing reducers for 24mm (Shimano) cranks. The bearings are in good condition.

The chain is not worn, and the cassette and chainrings are not worn.

Both front and rear brake pads have plenty of life.

The shifters and derailleurs are working as they should, as too are the brake callipers.

The wheel rims are wearing but not worn out yet. The wheel bearings are in good condition, the rear freehub bearings have recently been replaced.

The tyres are in excellent condition with plenty of wear left.


If you have any questions or would like any more pictures for detail, please let me know I am more than happy to provide. - I am located in Richmond, Surrey!




Full Spec list below



FRAME - Specialized FACT 9r carbon, FACT construction, compact race design, 1-3/8" lower bearing, OSBB

FORK - Specialized FACT carbon, monocoque, OS race for 1-3/8" bearing

FRONT WHEEL - Fulcrum Racing S-19 Light

REAR WHEEL - Fulcrum Racing S-19 Light

INNER TUBES - Specialized, Presta valve

FRONT TIRE - S-Works Turbo 700x24mm

REAR TIRE - S-Works Turbo,700x24mm

CRANKSET - Shimano Ultegra 6800 172.5mm crank length (52/36 Teeth Chainrings)

SHIFT LEVERS - Shimano Ultegra 6800 11-speed

FRONT DERAILLEUR - Shimano Ultegra 6800, braze-on

REAR DERAILLEUR - Shimano Ultegra 6800, 11-speed

CASSETTE - Shimano Ultegra 6800, 11-speed, 11-28t

CHAIN - X11-EL Silver 11 Speed (with quick link)

FRONT BRAKE - Shimano Ultegra 6800

REAR BRAKE - Shimano Ultegra 6800

HANDLEBARS - Specialized Comp, shallow drop, alloy, 125mm drop, 70mm reach

TAPE - Specialized Roubaix

STEM - Specialized Comp Multi, 3D forged alloy, 4-bolt, 12-degree rise

HEADSET - 1-1/8" upper, 1-3/8" lower, integrated Cr-Mo cartridge bearings, 20mm cone spacer, w/ 20mm spacers

SADDLE - Body Geometry Toupé Comp Gel, hollow Cr-Mo rails, 143mm

SEATPOST - Specialized Comp, carbon, single bolt

SEAT BINDER - Specialized, alloy, 2-bolt, 27.2mm





Frame Size & Geometry


FRAME SIZE - 56cm

Stack - 564mm

Reach - 395mm

Head-Tube Length - 160mm

Head-Tube Angle - 73.5°

BB Height - 272.5mm

BB Drop - 69mm

Trail - 56mm

Fork Rake/Offset - 43mm

Front Centre - 591mm

Chainstay Length - 405mm

Wheelbase - 986mm

Top Tube Length (Horizontal) - 565mm

Bike Standover Height - 795mm

Seat Tube Length - 501mm

Seat Tube Angle - 73.25°

Handlebar Width - 420mm

Stem Length - 100mm

Crank Length 172.5mm

Seatpost Length - 400mm

Lo