2018 Marin Rift Zone 3 29er upgraded + extras

Selling my 2018/2019 Marin Rift Zone(frame is unchanged from 2018-2019 model year). Mechanic owned, well maintained. This is a hard charging short travel 29r that is far more capable than it's travel numbers suggest. It has 120mm of travel out back, and it currently has 140mm of travel up front, which really brings the bike alive in my opinion (approx. 66.5 degree HTA). There are lots of reviews floating around on this bike that are all favorable. I have upgraded it considerably from the stock build kit to reflect it's shreddy characteristics. Only stock parts on it are the Rear Shock, headset, stem, and brakes. I am the original owner and it has only been ridden since May 2018, a lot of the upgrades are much newer than that too, so everything is in really good shape aside from some scratches here and there. One very small nick on the stanchion that is too small to even dream of ever causing any sort of problems. Did my best to show all of the worst scratches in the pictures. Only selling because I prefer the feel of 27.5 wheels.

Spec List:
Frame: Marin Rift Zone 3 in large. Matte silver/gloss black. 120mm of rear travel 148mm boost spacing.
Frame Axle: Robert Axle project bolt on Axle
Rear Shock: Rockshox Deluxe RT 210x50mm. Custom tuned to bike. Was originally going to upgrade but found this shock to work remarkably well for this frame.
Fork: Manitou Magnum Pro Boost 140mm. IVA, IRT and Bolt on axle upgrades.(IVA currently installed. Switching them is easy) Has HSC/LSC, Rebound, and Hydraulic bottom out adjust. (same fork as Manitou Mattoc 29 with a different name, great fork)
Wheels: Stan's Arch mk3 28h laced to Sram 900 hubs with DT Swiss Comp Race double butted spokes and Lilly Precision alloy nipples. XD driver rear.
Derailleur: Sram GX 11s
Shifter: Sram GX 11s
Crankset: Truvativ/Sram Stylo DUB 170mm
BB: Sram DUB BSA threaded
Chainring: Chromag Sequence DM GXP 30t
Chain: Sram PC1170 (relatively new)
Cassette: Sram XG-1150 XD (older than the rest of the drivetrain, but still shifts great)
Brakes: Deore m6000. Relatively new metal shimano pads.
Rotors: Shimano RT-66 180mm front, 160mm rear
Handlebars: Deity Blacklabel 787 proof platinum silver 15mm rise uncut.
Stem: Marin OEM 3d Forged alloy 45mm (basically brand new, used a different stem)
Grips:Marin OEM Single Clamp Locking (brand new, used different grips)
Headset: FSA No 57E, Sealed Cartridge Bearings
Seatpost: BikeYoke Revive 185mm. 30.9mm Long travel dropper post.
Saddle: CHOOSE BETWEEN Chromag Lynx DT black or Chromag Trailmaster perf. brown leather,
Pedals: RaceFace Chester black
Chainguide: Deckas black.
Front Tire: Schwalbe Magic Mary 29x2.35 Addix Soft, Snakeskin. Lots of life left in it.
Rear Tire: WTB Trailboss 29x2.4 Fast/light. Starting to show wear, but not dead yet.

Extras:
-Another WTB Trailboss 29x2.4 Fast/light. Was the stock front tire, not used for very long before taking it off.
-Vittoria Goma 29x2.25 tire, almost new.
-2 spare derailleur hangers
-Torque cap endcaps for the front hub.
-Brand new seatstays. Rear end was replaced under warranty, but the seatstays were fine so i left the original one on.
-IRT upgrade for fork
-Couple of 29" innertubes.
-Has Lizard skins downtube protector on it mounted upside down (did this for my truck's shuttle pad primarily)

Things worth mentioning:
Steer tube is cut pretty short. Cannot use any spacers with existing stem. Front end is pretty high already with the 140mm travel on a 29er anyway so I always ran the stem slammed with low rise bars. Could be adjusted more with a lower stack height stem. This stem has a pretty tall stack.
Seatpost cannot be slammed in frame. Too long. Minimum pedaling seat height ~730mm from BB to saddle rails. If it goes any lower the actuator at the bottom of the post jams up against something and can't reset. I always ran it much higher since I have long legs. Make sure that works for you. Otherwise I have no issue selling without the seatpost for a lower price.

This is a super fun short travel aggressive trail/light enduro bike similar to a Kona Process 111, Transition Smuggler, or Banshee Phantom, ect.
Asking 1900$ plus shipping. Bike will be professionally boxed up and shipped via bikeflights.
thanks.