2018 Yeti SB6 TURQ X01 Eagle Small

Looking for the super bike that will make all your mountain biking dreams come true? Look no further! This bike has been ridden less than a year and is in excellent condition. The SB6 is my favorite bike and I'm upgrading to the 2019 for a bigger fork and to freshen up. I am a female rider that takes great care of my bikes and rides well so this bike has seen very little impact due to crashing. There is a small scratch on the handlebars but the rest of the bike is protected by UPLND STOKE, an amazing new Colorado company making custom bike protection kits (a $150 value!). I could remove it for you but I recommend that you keep it on there to keep it protected.

BRAND NEW DT SWISS WHEELSET AND NEW MAXXIS DH TIRES to get you rolling fast and furious.
LAST FORK/SHOCK SERVICE WAS FEB 2019
LAST BRAKE BLEED AND TUNE WAS FEB 2019
Ridden once in March, cleaned completely and ready to go.

https://uplndstoke.com

Wheel Size: 27.5" (650b)
Frame Material: Carbon Fiber
Frame Material Details: High modulus TURQ carbon fiber main frame and swing arm, custom down tube protector and chain guards
Rear Travel: 152mm
Rear Shock: FOX Factory DPX2, 8.5" x 2.5"
Fork: FOX Factory 36
Fork Travel: 160mm
Head Tube Diameter: Tapered, 1.125" top, 1.5" bottom
Headset: Cane Creek 40 Inset Taper
Handlebar: Yeti Carbon 760mm, 35mm clamp
Stem: Race Face Turbine Basic, 50mm length, 35mm clamp
Grips: Ergon GA2
Brakes: SRAM Guide RSC, Centerline 180mm rotors
Brake Levers SRAM Guide RSC
Drivetrain: 1x12
Shifters: SRAM X01 Eagle, 12-speed
Rear Derailleur: SRAM X01 Eagle, 12-speed
ISCG Tabs: ISCG05
Cranks: SRAM X01 Carbon Eagle
Chainrings: SRAM X01 Eagle, 30 tooth
Bottom Bracket: SRAM GXP BB92
Pedals: N/A
Chain: SRAM Eagle, 12-speed
Cassette: SRAM 1275 Eagle, 10-50 tooth, 12-speed
Rims: NEW DT Swiss XM481
Hubs: NEW DT Swiss 350
Front Tire: NEW Maxxis Highroller DH Casing, 27.5" x 2.5"
Rear: NEW Maxxis Highroller DH Casing, 27.5" x 2.3"
Saddle Chromag Juniper
Seatpost: Rockshox Reverb 125mm
Seatpost Diameter 30.9mm
Seatpost Clamp: Standard single bolt
Rear Dropout / Hub Dimensions: 148x12mm Boost

Weight 29 lb 8.3 oz (13,390 g)
Miscellaneous Switch Infinity suspension system
Collet axle suspension pivots
Enduro Max sealed bearings
Titanium shock hardware bolts
Internal cable routing
Integrated axle and derailleur hanger system
Coil shock compatible
D-type side swing front derailleur compatible