2020 Yeti SB130 T3 Build W/ AXS

Here's your chance to get a basically new SB130 for $2,000 off retail, be one of the first with the new frames. I bought this after selling my SB150 wanting something with less travel but it ending up being a tad too small for me (I'm 6ft). It's about as clean as you can get for a used bike, It has only been ridden a handful of times. Frame wrap was applied before it ever touched the dirt there are a few rub marks on the frame protection, one very small nick on the rear triangle, and some dings on the rims that's it. I've attached plenty of pictures for your viewing pleasure. Let me know if you have any questions, I'd love a local pickup but will ship on your dime. Thank you!

FRAME: TURQ Series carbon fiber frame, trail inspired geometry, Switch Infinity suspension technology, press-fit BB92, fully enclosed internal cable routing, 148mm x 12mm BOOST dropouts, sealed enduro max bearing pivots, integrated derailleur hanger, and axle.
TRAVEL: 130MM (5.1”)
MATERIAL: TURQ SERIES
WEIGHT: 29.38 LBS (13.32 KG)
_
FORK: FOX FACTORY FIT 4 36/150MM
SHOCK: FOX FACTORY DPX2, 210 X 52.5MM
WHEELSET: DT SWISS M1700 30MM
REAR DERAILER: SRAM AXS XX1
SHIFTER: SRAM AXS XX1
CRANKS: SRAM X01 EAGLE 30T 170MM
BB: SRAM DUB BB92
CASSETTE: SRAM XX1 AXS
CHAIN: SRAM AXS RAINBOW
BRAKES: SRAM G2 RSC
ROTORS: SRAM CENTERLINE 180/180
POST: FOX TRANSFER FACTORY 31.6MM 150MM
FRONT TIRE: MAXXIS MINION DHF 2.5 EXO
REAR TIRE: MAXXIS AGGRESSOR 2.3 EXO
HEADSET: CANE CREEK 40 INTEGRATED
BARS: YETI CARBON 35X760MM
STEM: RACE FACE TURBINE 35X50MM
GRIPS: ODI ELITE PRO
SEAT: WTB VOLT CUSTOM