2013 Yeti bike SB66 Medium Aluminium XTR Hope Fox Marzocchi

Yeti SB66 Medium Aluminium frame with
FOX kashima ctd 3 position shock, the shock has some marking but this doesn’t effect the performance. Frame rear bolt through 142mm. The frame was invisiframed from new which I have left on the frame.
XTR 10 speed group set including right and left shifters, rear mech, Double chain set, Bottom Bracket.
Front mech XT direct mount
Hope M4 front and Mini rear brakes with Blue bore caps, blue braided hoses nearly new pads. Blue 160mm discs.
Kore Short stem and 800mm kore torsion bars.
Hope Headset
Marzocchi 55cr 170mm forks 20mm bolt through.
I have 10 and 20mm lowering spacers never bothered to fit them.
Rock shox Reverb seatpost.
26” Wheels with Stans rims flow on rear crest in the front with superstar hubs quite long in the tooth but run true.
Tyres are hardly worn front Minion and rear High roller.
ODI grips

Cash on collection

I renewed the frame bearings shortly before upgrading to my new bike. I haven’t ridden it for well over a year. I would personally service the shocks and post if I was keeping it as the post and rear haven’t been done in while and the front hasn’t had a first service as it was not that old. However it all works.

First come first served pick up from Brighton BN2 4L.