2018 XL Kona Process AL/DL Frame

2018 Kona Process AL/DL frame w. a 62.5mm DPX2 to give you 159mm rear travel.

I bought this bike new in November 2018 and rode it 2 years 'till I moved to a different frame an migrated most of my parts over. I rode this bike about 2,000 miles in those 2 years.
It definitely has scratches from use, but no rash, dents, crash damage, etc. - lot's of life left in her. I've tried to show every angle and blemish but if you want to see any other angles, just let me know and I'll send you whatever you want.

I changed the shock to a Fox DPX2 for better handling & climbing and also got a little extra travel out of it - about 159mm. The tire doesn't rub anything (or even come close) at bottom-out. This frame could probably go up to a 65mm stroke (which opens up a lot of possibilities for a coil shock) without any issues.

Extras: I'll send along the original shock in case you need a backup or just enjoy a bike that handles and climbs poorer than it should. Also the original headset (it's not a very nice part but would get you rolling if you didn't want to buy another one.) The frame has a fairly recent SRAM GXP bottom bracket - about 400 miles on it and I'll send the dust shields and wave washer to get you rolling. I'll also send along a spare derailleur hangar. I always kept one with me but never needed it (knocks on wood.)

The dropper post pictured is not part of this listing but is available to buy. I could make you a deal if you want it too. It's getting squishy (about 6mm) and could use a rebuild but it works well enough to run it a while longer.

I have a bunch of other parts in my garage so if you need something let me know - I'd be happy to make you a deal and put them in the box with the frame.

Feel free to ask any questions you might have.

Buyer picks up the frame in person or pays actual BikeFlights shipping.