2016 Specialized Stumpjumper Carbon Comp 650B

Excellent bike, bought from new with all the original paperwork for bike and parts etc. Size Large.

Well loved and looked after, the minor scuffs are shown in photographs. No structural damage of any kind. Brand new shop fitted bottom bracket and chain.

Collect in person preferred but can also provide a quote for postage (will be packed well in bike box). Bike will also come with spare/removed parts and spare 650B summer tyres if wanted.

Below is the official specification sheet from Specialized that I have edited to reflect the new parts fitted.


FRAME FACT 9m carbon, Trail 650b Geometry, FACT IS carbon construction, M5 alloy rear triangle, SWAT Door integration, fully enclosed internal cable routing, 142mm dropouts, sealed cartridge bearing pivots, replaceable derailleur hanger, front derailleur compatible w/ Taco Blade, 150mm travel. The bike is now 1x10 with Front derailleur and taco blade removed. I still have these parts if you wish to reattach back onto the bike.


REAR SHOCK Custom Fox Float Evolution CTD, Autosag, Rx Trail Tune, 197x47.6mm


FORK RockShox Pike 650B, 160mm travel, rebound adjust, climb/descend modes, tapered steerer, 15mm Maxle Lite thru-axle


HEADSET Hella Flush, 1-1/8" and 1-1/2" threadless, Campy style upper w/ 1-1/2" lower, cartridge bearings


STEM Specialized XC, 3D forged alloy, 4-bolt, 6-degree rise


HANDLEBARS Specialized, 6000 alloy, 8-degree backsweep, 6-degree upsweep, 25mm rise, 750mm, 31.8mm


GRIPS RaceFace Atlas Grips, black o-rings


FRONT BRAKE Shimano Deore, hydraulic disc, resin pads, Ice-Tech resin pads w/ fins


REAR BRAKE Shimano Deore, hydraulic disc, Ice-Tech resin pads w/ fins


BRAKE LEVERS Shimano Deore BL-M615, I-spec compatible


FRONT DERAILLEUR (REMOVED) SRAM X7, mid direct mount, w/ Taco Blade. I still have these parts to be sold with the bike.


REAR DERAILLEUR Shimano XT Shadow Plus, 10-speed, SGS cage


SHIFT LEVERS Shimano SLX, 10-speed, trigger, I-spec


CASSETTE SRAM PG-1030, 10-speed, 11-36t


CHAIN SRAM PC-1031, 10-speed, w/ PowerLink NEW


CRANKSET Custom SRAM S-1250, 7050 alloy arms, 10-speed cassette. RaceFace chainring with black chain guide.


BOTTOM BRACKET SRAM, PF30, OS press-in bearings, sealed cartridge. Has been changed multiple times as per usual wear.


PEDALS Nukeproof Neutron EVO Flat Pedals with all pins, black.


RIMS Roval 650b, alloy, 29mm inner width, 24/28h


FRONT HUB Specialized, Hi Lo disc, sealed cartridge bearings, 15mm thru-axle, 24h


REAR HUB Specialized, Hi Lo disc, 4x sealed cartridge bearings, 12mm thru-axle, 28h


SPOKES DT Swiss Industry, stainless, black


FRONT TYRE Specialized Hillbilly 650Bx2.3" Tubeless


REAR TYRE Specialized Butcher 650Bx2.3" Tubeless, folding


INNER TUBES Tubeless Setup w/ Stans Tape and Glue


SADDLE Body Geometry Henge Comp, hollow Cr-Mo rails, 143mm


SEATPOST Crankbrothers Highline 3 Dropper w/ internal routing. Have never had a single issue with this post, fully recommended.


SEAT BINDER Specialized, 7050 alloy, single bolt, 34.9mm, black


Please feel free to message me any questions, will be happy to get back to you.