2017 MRP Ribbon Air 44mm Offset

I'm selling my 2017 MRP Ribbon Air 44mm offset, currently setup with 140mm of travel (adjustable from 120mm-160mm). I have just had a lowers service done at Phat Moose Cycles and have not even installed it since.

This fork features low speed compression adjustment, rebound adjustment, ramp adjustment, positive air pressure adjustment, negative air pressure adjustment, and ramp contol. This allows an experienced, detail oriented rider to get the exact setup that they want. The adjustable negative air spring pressure allows the off the top suppleness to be adjusted to exactly your preference. This is the same as DVO's OTT but using an air chamber to allow riders of all sizes to get the perfect setup. The ramp control allows you to adjust the progression of the fork on the fly with just a twist of a knob. You can easily go from a slow wet rocky tech setup to a dry weather bike park setup in seconds.

If the adjustment sounds overwhelming, MRP supplies very good base setups for all riders so you can get setup right out of the gate.

Steerer tube is cut to 6 3/8 inches which is plenty for all but the longest headtubes (setup on my L Ripmo with 10mm of spacers below my stem).

The fork has been tapped for a one up tool and will come with a one up top cap included. You don't need to run the tool to make the fork work, but it is incredibly convenient having the tool there. Additionally if you don't like the one up top cap setup you can toss a star nut in there and run a normal top cap.

If you would like any additional pictures feel free to ask. I haven't gotten around to taking any new ones since the fork has been cleaned/serviced.