Professional Bicycle Mechanic’s Master Tool Kit Set

Professional Bicycle Mechanic’s Master Tool Kit Set-

Here is the list of tools I am selling as I got out of the sport because I hurt my pelvis badly:

All are Park Tool brand unless I mention otherwise. Many are brand new and were never used. Some are still even in their original packaging.

Includes tool box for free- paid $29.99 for it new.

Buyer pays all shipping or you can pick up at my house.

TOOLS:
TM-1 tension meter with spoke size gauge and tension meter laminated chart- paid $83.00. Selling $15.00
Jagwire cable and housing cutter / crimper tool- paid $32.00. Selling $5.00
PP-1.2 hydraulic brake piston press- paid $19.95. Selling $7.00
CRS-1 crown race setting system with adapters for every possible size headset- 1”, 1 1/8” and 1 ¼”- paid $87.00. Selling $20.00
CRS-15 crown race setting system with adapters for 1.5 inch headsets- paid $84.00. Selling $20.00
CRP-1 crown race puller- no longer made- this is a very rare tool- paid $240.00. Selling $35.00
RWC hub bearing press tool the same as the Park Tool version with all of the necessary adapters- paid $220.00. Selling $30.00- new, never used
Harbor Freight blind hole bearing puller set- paid $131.00. Selling $25.00- new, never used
Specialized shop bicycle floor standing air pump- Air Tool Sport- paid $49.00. Selling $15.00
2- complete sets of cone wrench/spanner wrenches. This is Park Tools SCW series of spanner wrenches in every possible size in two complete sets- model/part #- SCW-SET.3. Sizes from 13mm up to 28mm- paid $78.00 PER set = $156.00 total. Selling $35.00 total for both sets
Chris King bottom bracket, headset and crown race installation adapters complete set- in 1 inch, 1 1/4-in inch, 1 1/8 inch and 1.5 inch sizes- paid $96.00. Selling $25.00- new, never used
Chris King BBTL 2 piece tool set to install bottom brackets- paid $45.00. Selling $15.00- new, never used
Chris King hub cone adjusting tool- paid $31.00. Selling $13.00- new, never used
6 pieces of every possible size of spoke wrenches- paid around $68.00. Selling $10.00 total
Disc brake pad spacers to insert when the pads are removed so the caliper does not close itself shut- I have multiple sets of them- paid around $30.00. Selling $5.00
Chris King hub repair, installation and maintenance tool kit- 4 total pieces- model R45- Paid $256.00. Selling $60.00- new, never used
X-Tool splined bottom bracket removal tool- paid $22.00. Selling $5.00
SRAM chain gap adjustment gauge for rear derailleur- paid $8.00. Selling $3.00
FR-5G- cassette nut removal tool splined- paid $9.00. Selling $3.00
32, 33 and 34 mm sockets for removing fork suspension top of cartridge/stanchion nut to get access to internal for springs & air damper cartridges- paid around $58.00 total. Selling $15.00 total
Shimano TL-UN74 crank or bottom bracket removal tool splined- paid $19.95. Selling $5.00
Rockshox digital readout suspension air pump- paid $75.00. Selling $15.00
Fox manual dial analog gauge readout suspension air pump- paid $36.00. Selling $7.00
DT-2 disc brake rotor truing repair tool- paid $20.00. Selling $7.00
A set of 9- totally different spanner wrenches in all different sizes and styles as well as all different brands. These are for suspension tweaks and for getting into hard to reach places. This is a really exotic set of all very different spanner wrenches. I paid around $225.00 new for them all. Selling- $25.00
5- different types of chain ring hardware back of nut holder wrenches- paid around $48.00. Selling $10.00
Multiple sets of plastic and metal tire bead breaker and installation levers. Paid around $80.00. Selling- $10.00
CT-5 chain breaker tool- paid $18.00. Selling $5.00
TFT Fox Shox bearing bushing removal & installation tool- paid $23.00. Sell $5.00
Shimano TL-FC16 crank set arm installation tool- paid $8.00. Selling $2.00
Schrader valve internal pin removal tool. Paid- $12.00. Selling- $5.00
Shimano TL-FC20 and 21 crank hardware and spanner wrench tools- paid $23.00 total. Selling $5.00
Shimano TL-FC10 crank puller tool- paid $23.00. Selling $5.00
CNW-2 crank hardware and spanner wrench tool- paid $7.00. Selling $3.00
2- pieces- CCP-2 crank pullers- paid $34.00 total. Selling $5.00 total
RWC mini grease gun- paid $22.00. Selling $5.00
CWP-6 crank puller and wrench- paid $23.00. Selling $7.00
MLP-1 spanner wrench pliers- paid $17.00. Selling $3.00
CCP-4 crank puller tool- paid $18.00. Selling $3.00
2- total pieces- RWC NBT2 and DUT1 bearing press tools- paid $37.00 total. Selling $8.00 total
RT-1 headcup steering race remover works from 1 inch up to 1 1 /4 inch - paid $37.00. Selling $17.00
A ton of anodized shrader and presta valve caps in anodized aluminum. Plus valve adapters. Paid around $85.00 for all of these. Selling- $10.00
2- 17mm combination wrenches for adjusting hubs- paid $22.00. Sell- $9.00
BBT-19.2- bottom bracket removal and installation tool- paid $22.00. Sell- $8.00

Grand total: Paid new- $2,690.00 for it all Selling it all for $545.00