2020 Zanconato Custom Steel Disc All-Road/Gravel Frameset

I purchased this bike second hand and am just not riding enough. This is from the original seller, bike has less than 200 miles on it and never crashed. Bike is built for Di2, can be 650B or 700C
To quote original seller:

$1600 shipped price drop — come on people there’s a global bike shortage and this thing fricks

“Up for sale is a nearly new custom Zanconato Steel All-Road/Gravel frameset. I had this custom ordered and was in the queue a very long time. It's a long story, but after completing the project and riding it to test out the build etc. I realized that without direct access to trails and having to load up the bike on the car, that I miss having a light, go-fast bike. So this beauty is up for sale.

The main triangle of the frame is Life tubing with the chain/seat stays Zona. I wanted to keep decent road behavior and a horizontal TT so I kept chainstays shorter at 425mm. The frame has a 44mm headtube, BSA threaded BB, accepts Di2/eTap/EPS groups (can be setup 2x), 3 bottle mounts, pump peg, rack & fender mounts front/rear, 12mm flat mount discs front/rear, external rear brake cabling and 27.2mm seat post. Other details include the custom headbadge and the rear taillight braze on (on the seat tube). Tire clearance is 700x44 and 650x2.2". The Rodeo Labs fork has adjustable axle end caps allowing you to run either 12mm or 15mm. I have both sets of end caps, the tool and both the 12mm and 15mm front axle. As you can see, this thing is loaded! The geometry for the frame is included in the pictures. While the top tube might look slightly longer, I typically ride road bikes with a 55.5 to 56cm top tube and this frame fits great. I have normal proportions, at 5'11" and 32" inseam for reference.

- Zanconato frame
- Rodeo Labs Spork v3, carbon fork with rack/fender mounts, dynamo wiring, about 35mm of spacers installed
- Chris King i7 black headset
- Deda SuperZero alloy post, 27.2 with setback, logos removed
- Silca Impero Ultimate frame pump, paint matched to frame
- Rear taillight (to be wired to a dynamo hub);
- PRO 90mm stem
- 42cm Ritchey WCS Ergomax Handlebar