2015 Santa Cruz Nomad V3

Frame: 2015 Santa Cruz Nomad V3 Carbon C chassis, Size Medium
Rear Shock: Push Eleven Six, tuned for rider at 170 lbs for trail riding. Recently rebuilt for annual service on 9/15/20
Fork: 2020 Fox Factory 36 160 mm of travel, Kashima coated. Grip 2 Damper
Headset: Cane Creek forty
Wheels: Stans Flow ZTR laced to DT 350 hubs. Recently purchased on 1/29/21. Only rode the wheels twice
Front Tire: Maxxis Assegai 27.5x2.50 WT 3C Maxterra EXO+
Rear Tire: Maxxis Agressor 27.5x2.30 Exo
Cassette: SRAM Eagle, 10-50t, 12-speed
Chain: SRAM XX1 Eagle, 12-speed
Rear Derailleur: SRAM XX1 Eagle, 12-speed
Crankset: SRAM XX1 Eagle Carbon, 32T
Shifter: SRAM XX1 Eagle, 12-speed
Brakes: Shimano XT M8120 4 piston brakes with Shimano XT M8100 brake levers
Rotor: Shimano Ice Tech 200 mm front and 180 mm rear
Handlebars: Race Face Next
Stem: Race Face
Saddle: WTB Volt
Seatpost: Rock Shox Reverb Stealth Dropper, 150 mm. 1st generation A1
Grips: ODI Elite Pro
Chain guide: MRP SXG

Bike is ready to ride! The dropper works but is slightly slow to return. It does not sag however. It may need to rebuild. The bike is upgraded with a 2020 fox factory fork and push eleven six shock. Wheels are brand new and recently purchased on 1/2021. It does have some cosmetic scratches that are not noticeable.

Also, when I was installing the brake set, I forgot to put on the rubber cover on the left brake lever I do have the brake cover but haven't had the time to put it on as it does need another bleed if it were to be installed. It obviously does not affect performance more of a cover

I also have an extra lower link with new bearings already pressed. I will also give you with the purchased along with the derailleur hanger. If you wish, I can install for you.