2019 Kona Process 153 CR 29 XL

FRAME: Kona DH Carbon w/ 6061 Aluminum Chain Stays (frame covered in 3M Paint Protection Film and 3M Scotch-Seal Mastic Tape)
REAR SHOCK: RockShox Super Deluxe RCT 205 x 60mm Trunnion (w/ brand new shock body and 4.5 Super Deluxe Volume Reducers - 2 normal tokens and 1 Gnar Dog token)
FORK: RockShox Lyrik RC Charger 2 DebonAir 160mm (w/ upgraded Charger 2.1 damper and 2 Bottomless Tokens)
CRANKS: SRAM NX Eagle DUB
CHAINRING: North Shore Billet SRAM 1x12 30t Variable Tooth Direct Mount
B/B: SRAM DUB PF92
CHAIN: SRAM XX1 Eagle 12 Speed Chain (Black)
FREEWHEEL: SRAM X01 Eagle XG-1295 10-50t 12spd Cassette
DERAILLEUR: SRAM GX Eagle RD-GX-1-B2 (installed in December, 2020; backwards compatible, works with both 10-50t and new 10-52t cassettes)
SHIFTER: SRAM GX-Eagle (installed in December, 2020)
BRAKE CALIPERS: SRAM Code R (new rear brake pads in March, 2021)
ROTORS: SRAM Centerline 200mm
HANDLEBAR: Kona XC/BC 35 780mm
STEM: Kona XC/BC 35
SEATPOST: 2021 Rock Shox Reverb 175mm w/1x Remote Lever 31.6mm (BRAND NEW)
SEAT CLAMP: Kona Clamp
GRIPS: Kona Key Grip (BRAND NEW)
SADDLE: WTB Volt Pro
FRONT HUB: 2021 Rocky Mountain Sealed Boost 15mm (BRAND NEW)
REAR HUB: 2021 DT Swiss 370 Boost 148mm (BRAND NEW)
SPOKES: 2021 DT Swiss Competition 2.0/1.8/2.0 (BRAND NEW)
RIMS: 2021 WTB ST Light i30 TCS 2.0 Tubeless Ready (Tape Included) 32H (BRAND NEW)
FRONT TIRE: Maxxis Minion DHF 29 x 2.5″ WT 3C MaxxTerra TR EXO+
REAR TIRE: Maxxis Minion DHR II 29 x 2.4″ WT 3C MaxxTerra TR EXO+
PEDALS: Deity TMAC Black w/ new internals/TMAC Rebuild kit
FENDER: MarshGuard Fork Black
TOOL SYSTEM: OneUp EDC Tool System w/ EDC V1 Tool

Bike regularly maintained by Wheelthing/Dialed Service/Two Wheels Adventure. Frame wrapped in 3M Paint Protection Film and 3M Scotch-Seal Mastic Tape. Wheels are from a brand new 2021 Rocky Mountain Altitude Carbon 50 and have never been ridden. Upgrades from stock include SRAM Code R Brakes, GX B2 Derailleur/Shifter, XO1 cassette and XX1 chain, NSB chainring, WTB Wheelset, 200mm rear rotor, Bottomless Tokens and Volume Reducers, and OneUp EDC Tool System. If interested, additional brand new tires (same combo as listed) and valves can be included for $150 for tubeless setup.

Bike’s in excellent condition. Ridden approximately once-a-week for the past two years. Very well cared for and safely ridden with no major crashes. Full linkage bearing overhaul in late March and full shock/fork service with new dust seals, foam rings, o-ring seals and sealheads, as well as the new body/stanchion for the shock in April (all in, $1,000 recently put into it – receipts for work can be provided upon request). Honestly, the bike feels better than new. Wasn't expecting to sell anytime soon but decided to make the jump to 170mm of travel. Absolutely amazing bike that I’m definitely gonna miss.