2017 Devinci Carbon Django 29 Large Fox 36

Bought as a frameset from Mojo wheels in 2017. Drivetrain and a few other parts are brand new as I pulled my I9 enduro torch wheels and drivetrain.

Mechanically the bike is in great shape. The suspension had minor services regularly but could use damper services. Fork bushings are tight and everything holds air. Bearings were replaced when they showed signs of wear. The lower shock eye bushing has some play if I was keeping the bike I would order one from Burgtech. I have a spare bearing or two I will include. Every main bearing is the same size. There is a missing cable port I will try to pickup this week.

Cosmetically it’s in okay shape. I transported it on a shuttle pad so there is some frame/fork rub. The clear coat is pealing on the top tube and a few other areas.


Fox Factory 36 FIT4 51 mm offset set to 140mm. It can be extended to 160 without buying any parts.

Cane Creek DB inline with extended stroke with Burgtec Offset bushing and needle bearing upper bushing. This extends the rear travel to 135mm and keeps the BB height close to factory. It’s very close to a Santa Cruz Hightower V1.

Works -1 degree headset

Niner Boost wheelset

Maxxis 2.5 Assegai/DHR wide trail tires

BOX three prime nine group 11-50 (brand new)

Shimano 4 piston MT420 brakes 180mm rotors

Shimano Deore 175mm crank 32t (brand new)

Raceface SixC Carbon 35mm bars

RaceFace ride 60mm stem

OneUp 170mm dropper

Wolf Tooth 1x dropper lever (brand new)

Chromag Seatpost clamp

Pro logo Q saddle