2021 Banshee Spitfire V3

Hello,

Just bought this frameset from the great folks at Banshee and built it up with a new drivetrain and the rest is from my Honzo, all of which have low miles and were carefully maintained. Here’s the breakdown on the frame and parts

New Banshee Spitfire V3 frame, Fox Float DPX, Banshee seat collar and headset.

New Shimano Deore 170mm 10 speed cranks w/ 32t chainring, new Deore rear derailleur and 11-42 cassette, XT chain, M770 XT shifter

New Maxxis Assegai DoubleDown MaxxGrip 2.5 front tire

New Maxxis Minion DHR DoubleDown MaxxGrip 2.35 rear tire, w/ New Tannus insert

Stans Flow MK3 w/ Hope Pro 4 hubs and DT swiss spokes, set up with Stans tape and sealant

Shimano XTR M985 brake calipers paired to Zee levers

Shimano XT RT-86 203mm front rotor, 180mm rear w/ TiSpring bolts rear, Shimano front w/ adaptor

Fox Factory 36 RC2 @160 mm w/ SKF seals, Airspring baseplate that increases negative spring volume, decreases positive volume to the tune of one volume reducer token and also has less stiction than the stock baseplate. The maximum amount of tokens are installed in the fork. Included is the 15mm axle and spacers, along with the stock baseplate. This fork is easily adjustable internally from 130-180mm of travel with no need for additional parts

9.8 dropper post, zero offset, 200mm travel w Shimano M770 shifter modded into a dropper lever. SDG or WTB seat

50mm Protaper stem, Reverse 48mm rise Vink bars and Deity Supracush grips

Bontrager Bits integrated tool and Batcage bottle holder.

Does not include the chain device or pedals. The dropper cable housing length has been fixed since the photos were taken

Let me know if you have any questions about the bike.

Thanks!