DT Swiss 350 Hubs (Pair)

DT Swiss 350 Boost Hubs (Pair).

Just over a year old and removed from my Reserve wheels - had a couple of months of use before being swapped out for another brand and have been stored in my workshop ever since.

Both are boost spacing; 110x15mm front and 148x12mm rear. These are 28hole with 6-bolt disc attachment.

Rear hub is for SRAM cassette fitting.

I’ve also upgraded the rear hub to include the 54t ratchet so picks up more quickly than the standard version.

These are solid hubs and very reliable - very simple to service, but they’ll run and run with very little maintenance required.

Very good condition overall - one slight bad point however - one of the disc bolt holes on the rear hub has been slightly misshapen due to a disc rotor failure. A bolt will still screw in just fine and shouldn’t effect things, but it’s worth mentioning anyway. This wasn’t the reason I have taken them off - as mentioned I’d treated myself to another brand.

Ideally I’m looking for someone to collect these, however I may be able to post should the need be greater, but obviously would be at additional cost. If paying with Pay Pal goods and services - please include 3% to cover the fee.

Any questions, please ask otherwise thanks for looking.