2015 Santa Cruz Nomad - ENVE wheels, XX1, etc.
Category: Enduro Bikes
Condition: Good - Used, Mechanically Sound
Frame Size: L
Wheel Size: 27.5" / 650B
Material: Carbon Fiber
Front Travel: 160 mm
Rear Travel: 160 mm
Condition: Good - Used, Mechanically Sound
Frame Size: L
Wheel Size: 27.5" / 650B
Material: Carbon Fiber
Front Travel: 160 mm
Rear Travel: 160 mm
Original Post Date: Sep-28-2021 11:20:39
Last Repost Date: Oct-05-2021 8:54:32
Still For Sale: Sold
View Count: 291
Watch Count: 0
Last Repost Date: Oct-05-2021 8:54:32
Still For Sale: Sold
View Count: 291
Watch Count: 0
2015 Santa Cruz Nomad v3.
This bike is super light and still rips. I personally built and maintained it, I'm not a mechanic but I'm pretty meticulous about keeping my things nice. I got the racing bug and decided to grab a 29er but this is a damn good bike - its geometry is still very modern (well done Santa Cruz). Note rear travel is 165mm, Pinkbike doesn't have an option for that.
It's been ridden hard about 2,500 miles, and it shows! That being said, the frame has ZERO cracks or any kind of functional damage.
Shipped for 3700 USD (paypal only) and will be packed by a LBS depending on where I am. I'm also able to drop off virtually anywhere on the west coast in the next few weeks for 3500 USD (cash/venmo), driving from Seattle -> Socal.
All pivot bearings and shifter cable/housing just replaced last week (9/24/21) by Evo in Seattle, literally 15 miles ridden since (paid $200).
Enve M70 Thirty Wheels on DT Swiss 240s Hubs. The front wheel was retaped (ENVE tape) May 2021, and the rear wheel was just taped (Gorilla tape) last week on 9/24/21. I have extra Enve tape I can include.
The rear wheel will very slowly leak fluid through the spoke holes over time. It’s been taped half a dozen times this summer by myself, EVO Seattle, and a shop in SoCal, if your good with tubeless, maybe you can figure it out. It will still hold pressure for weeks, it’s more annoying than anything.
The rest of the specs:
Pike RCT3, 160mm. Full Rockshox rebuild May 2021. Less than 200 miles since.
Monarch Plus RC3 - Full Rockshox rebuild May 2021. Zero miles.
** Can include 2021 Fox Float X2 (same internals as 2022) for +$400
OneUp v2 180mm dropper. Installed May 2021. Less than 200 miles.
Shimano XTR Brakes (2 piston)
XX1 Drivetrain (11-speed). 8/10. Lots of life left. Shifts clean, I just replaced the cable, so some stretch to be expected.
Race Face Next Carbon cranks
Race Face Turbine 35mm x 35mm stem
Race Face SixC 35mm x 20mm rise carbon bars cut to 780mm
Maxxis Assesgai 2.5" EXO/TR/MaxxGrip (front) / Maxxis Aggressor 2.5" WT EXO/TR/MaxxTerra (rear). 9.5/10 life left.
WTB Volt saddle
ODI Rogue grips
Pedals not included. To reiterate, sold with monarch plus RC3 or 2021 X2 for +$400
This bike is super light and still rips. I personally built and maintained it, I'm not a mechanic but I'm pretty meticulous about keeping my things nice. I got the racing bug and decided to grab a 29er but this is a damn good bike - its geometry is still very modern (well done Santa Cruz). Note rear travel is 165mm, Pinkbike doesn't have an option for that.
It's been ridden hard about 2,500 miles, and it shows! That being said, the frame has ZERO cracks or any kind of functional damage.
Shipped for 3700 USD (paypal only) and will be packed by a LBS depending on where I am. I'm also able to drop off virtually anywhere on the west coast in the next few weeks for 3500 USD (cash/venmo), driving from Seattle -> Socal.
All pivot bearings and shifter cable/housing just replaced last week (9/24/21) by Evo in Seattle, literally 15 miles ridden since (paid $200).
Enve M70 Thirty Wheels on DT Swiss 240s Hubs. The front wheel was retaped (ENVE tape) May 2021, and the rear wheel was just taped (Gorilla tape) last week on 9/24/21. I have extra Enve tape I can include.
The rear wheel will very slowly leak fluid through the spoke holes over time. It’s been taped half a dozen times this summer by myself, EVO Seattle, and a shop in SoCal, if your good with tubeless, maybe you can figure it out. It will still hold pressure for weeks, it’s more annoying than anything.
The rest of the specs:
Pike RCT3, 160mm. Full Rockshox rebuild May 2021. Less than 200 miles since.
Monarch Plus RC3 - Full Rockshox rebuild May 2021. Zero miles.
** Can include 2021 Fox Float X2 (same internals as 2022) for +$400
OneUp v2 180mm dropper. Installed May 2021. Less than 200 miles.
Shimano XTR Brakes (2 piston)
XX1 Drivetrain (11-speed). 8/10. Lots of life left. Shifts clean, I just replaced the cable, so some stretch to be expected.
Race Face Next Carbon cranks
Race Face Turbine 35mm x 35mm stem
Race Face SixC 35mm x 20mm rise carbon bars cut to 780mm
Maxxis Assesgai 2.5" EXO/TR/MaxxGrip (front) / Maxxis Aggressor 2.5" WT EXO/TR/MaxxTerra (rear). 9.5/10 life left.
WTB Volt saddle
ODI Rogue grips
Pedals not included. To reiterate, sold with monarch plus RC3 or 2021 X2 for +$400
Warning: This listing is out of date. You must Edit this item before you can repost!"
$3,500 USD
Restrictions: Firm, No Trades, Local pickup only
Seattle, United States Related Listings
|
|
|
|
|
|
|
|