2016 YT Jeffsy AL1 with upgrades and extras

I bought this YT Jeffsy AL1 29 (size medium) new in late October 2016 and have taken good care of it since. I’ve loved it, it’s truly an excellent bike for everything around here and has tons of life left. I just want to try something new. It’s in good shape - it had some cosmetic paint chipping on the chain stays (YT isn’t exactly known for their finishing) that I touched up. Similarly, the fork has rack-rash on one side of the lowers that I touched up, but there’s no damage to the metal.

Fork, shock, and dropper stanchions are perfect.

I’ve kept up with maintenance on the bike the whole time, and everything is running well. Here are the specs. Anything that’s different from the stock spec is marked with an *, and notes are in parenthesis.

Frame: Alloy, 140mm, size M (bearings serviced winter 2020)
Shock: Rockshox Monarch RT3 HV (serviced December 2021)
Fork: Rockshox Pike RCT3 140mm (lowers serviced December 2021)
Headset: Acros
Handlebars: Race Face Turbine 770mm
Stem: Race Face Turbine 50mm
Grips*: Race Face
Saddle*: WTB Volt
Shifter: SRAM GX 11spd (cable changed October 2021)
Brakes: SRAM Guide RS (replaced via warranty in 2019 for sticky levers, so you don’t have to worry about that; bled October 2021), metallic pads
Rotors: SRAM Centerline 200mm front, 180mm rear
Seatpost: Rockshox Reverb B1 150mm (Bled October 2021. I’ve kept up with service and bleeds and never had a problem with the post.)
Crankset: Race Face Turbine 175mm cinch direct mount (such a good crank)
Chainring*: Wolf Tooth 30T
Bottom Bracket: Race Face press fit (new October 2021)
Chain: SRAM PC1130 (changed spring 2021)
Cassette: SRAM GX 11-42 11spd (changed fall 2020)
Derailleur: SRAM GX 11spd
Rims*: Stans Flow Mk3 front, DT Swiss EX 511 rear (set up tubeless)
Hubs*: Bicycle Wheel Warehouse hubs 32h front and rear (Rear hub is 6-pawl and has a high POE. The hubs are light, built up great, and have been smooth and trouble free)
Spokes*: Sapim double butted, brass nipples front, DT Swiss Prolock nipples rear
Tires*: Maxxis Assegai EXO MaxTerra 2.5 front, Schwalbe Hans Dampf SuperGravity Soft 2.35 rear (lots of life left on both)
Shock hardware*: RWC Needle Bearing Kit
Extras/Spares: spokes, derailleur hanger, stock shock hardware, set of metallic brake pads, fork tokens, shock spacers, an extra Matchmaker adapter, reverb bleed kit with some fluid, a little 0w fork fluid (maybe enough for one lowers service), manual

Let me know if you have any questions, and thanks for looking!