2018 custom Cube Hanzz 190 SL 27.5

First off, this bike rides insanely well, it is equally as strong as it is playful. I'm sad to be selling it but I want something that is a little more versatile for trail riding as well as Freeride. I have put lots of new parts on it. There is cosmetic damage on the frame, as I have shown on the photo, this is nothing to worry about. As the frame is raw alloy old scratches have oxidised which creates a seal ( the rough aluminium ).

From Cube: 'We built the Hanzz 190 SL to be strong enough to stand up to some serious riding, but nimble enough to be fun while you're shredding. That's why we used all the experience we've gained from building strong, light and manouevrable aluminium frames, starting with our High Performance Aluminium (HPA) tubes and using our mechanical forming process to ensure that the frame has strength and rigidity exactly where it's needed most. In case you're wondering, we backed up this design approach - as we do with all our frames - by rigourous lab testing to confirm that the Hanzz 190 SL is more than strong enough for the job.'

Here is the list of parts:

Frame Aluminium Light, Advanced Mechanical Forming, FSP 4-Link, ISCG Mount

Fork (BRAND NEW) DVO Onyx SC Boost Fork - 180mm - original RRP £949.95


Rear Shock Fox Van RC, 222x70mm, Rebound & Low Speed Compression Adjust

Size 18"

Headset FSA 1.5E ZS, Tapered, Top Zero-Stack 1 1/8" (OD 44mm), Bottom Zero-Stack 1 1/2" (OD 56mm) (now adjusted with other parts to fit the single crown fork)

Stem (BRAND NEW) DMR Defy Stem - original RRP £60

Handlebars Race Face Atlas 35 800mm 35mm

Grips/Bar Tape (CUSTOM) Burgtec Bartender Pro Greg Minnaar Signature Grips - original RRP £20

Seatpost CUBE Performance Post, 31.6mm

Saddle SDG FLY MTN 2

Front Brake Sram Code R, Hydr. Disc Brake 200mm

Rear Brake Sram Code R, Hydr. Disc Brake 180mm

Rear Derailleur Sram X1, Type2.1, 10-Speed

Shifters Sram X7 Trigger

Cassette Sram PG-1030, 11-28T

Chain KMC X10

Chainset Race Face Chester 32T, 170mm

Front wheel + hub (CUSTOM) DT Swiss E 1900 - original RRP £155

Rear Wheel + hub (CUSTOM) Hope Fortus 30W Pro4 - original RRP £280 - (p.s Niko Vink rides this wheel)

Front Tyre Schwalbe Magic Mary, Addix Ultrasoft, Kevlar, Super Gravity, Tubeless Easy, 2.35

Rear Tyre Schwalbe Magic Mary, Addix Soft, Kevlar, Super Gravity, Tubeless Easy, 2.35

Bottom Bracket

Seatclamp CUBE Varioclose, 34.9mm

Pedals N/A

Shock Hardware Front: 22x8mm, Rear: 22x8mm, e*thirteen LG1 Chain Guide, ISCG05

Message me if you have any questions!