2018 Canfield Riot Large / Fox Factory / all new wear parts

Canfield Riot frame purchased and built up in 2018; black with DVO green links. Completely rebuilt during Covid except for the rolling chassis--suspension has 0 miles on most recent service, drivetrain is brand new, brake pads brand new, tires have less than 30 miles on them. Really nice build on a really fun bike and completely ready to roll out the door. Selling it as I'm pretty much just riding a hardtail these days and more gravel than jumps.

The Riot rides like it's a little smaller than it is--VERY jumpable, flickable, super nimble for a 29er. Might not suit the hardcore enduro racing style but if you like to have a good time on PNW/BC trails this will get you there. VERY forgiving going downhill and uphill--the Canfield suspension is genuinely astonishing on technical climbs.

457 reach / 414 (!) rear-center / 66.5º head angle. Could be slacked out with an Angleset or similar if you want to update the geometry a tiny bit, but I never found it to want to be slacker and it really gets around the corners as it is. Would probably be best for someone 5'9"-6'0".

Fork: Fox 36 Float FIT4, fresh lower & air shaft service, comes with OneUp EDC tool installed (no star nut--tapped for the EDC instead).
Shock: Fox Float X. Got overshadowed by the Float X2/DPX2 that came out a year or two later but fantastic shock and a very good fit for this bike
Wheels: Hope Pro2 EVO / Stan's Flow MK3, 29mm internal; Maxxis Assegai 2.5WT EXO+ front and DHRII 2.4WT EXO+ rear. Less than 30mi on the tires
Cockpit: Fox Transfer 150mm dropper, WTB ReMote, Azonic 35mm rise / 780mm width handlebar, brand new Spank saddle and grips
Drivetrain: eThirteen TRS+ cranks, brand new wear parts: eThirteen 9-46T cassette, eThirteen 30T chainring, SRAM chain, GX 11sp shifter and derailleur. MRP AMg chain guide/bashguard.
Brakes: Magura MT5 4-piston, 180mm rotors front and rear, 1-finger lever swap. Brand new pads.

Happy to throw in the pedals (last-gen Anvl Tilt) if you want them. Same goes for the frame pump. The duct tape is just there so I have duct tape, it's not holding the pump together or anything :)

Local pickup would be ideal but if you wanna pay for BikeFlights, I can find a box and pack it up.